Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP171

Code: 101

Description: Exposure Lamp Error
The scanner has scanned the white plate, but cannot detect the white level.
Causes: • Defective exposure lamp
• Defective exposure lamp stabilizer
• Defective exposure lamp connector
• Unclean scanner mirror
• Scanner mirror out of position
• Defective SBU board
• Defective SBU connector
• Lens block out of position
• Incorrect position or width of white plate scanning (* SP4-015)

Code: 120

Description: Scanner home position error 1
The scanner home position sensor does not detect the scanner leaving the home position.
Causes: • Defective scanner home position sensor
• Defective scanner drive motor
• Defective scanner home position sensor connector
• Defective scanner drive motor connector
• Defective BICU board

Code: 121

Description: Scanner home position error 2
The scanner home position sensor does not detect the scanner coming back to the home position.
Causes: • Defective scanner home position sensor
• Defective scanner drive motor
• Defective scanner home position sensor connector
• Defective scanner drive motor connector
• Defective BICU board

Code: 141

Description: SBU black level correction error
• The automatic SBU adjustment has failed to correct the black level three times at the pre-offset adjustment.
• The automatic SBU adjustment has failed to correct the black level ten times at the PGA adjustment.
• The automatic SBU adjustment has failed to correct the black level ten times at the offset adjustment.
Causes: • Defective SBU board

Code: 142

Description: SBU white/black level correction error
The automatic SBU adjustment has failed to correct the white level ten times at the PGA adjustment.
Causes: • Defective exposure lamp
• Unclean white plate
• Incorrect position or width of white plate scanning (* SP4-015)
• Defective SBU board

Code: 144

Description: Communication Error between BICU and SBU
The BICU cannot correctly establish communication with the SBU.
Causes: • Loose connection of the flat cable between the BICU and the SBU
• Defective flat cable between the BICU and the SBU
• Defective BICU
• Defective SBU

Code: 145

Description: Automatic SBU adjustment error
The white levels of the white plate and the white paper are extraordinarily different during the Scan Auto Adjustment (* SP4-428-001).
Causes: • Defective exposure lamp
• Unclean white plate
• Incorrect position or width of white plate scanning (* SP4-015)
• Defective BICU board
• Defective SBU board

Code: 193

Description: Image transfer error
Scanned images are not transferred to the controller memory within one minute.
Causes: • Defective BICU board
• Defective controller board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie