Description: Transfer roller leak error (positive electrode)
The feedback voltage of the transfer roller is insufficient.
Causes: • Defective high voltage supply board
• Loose connection of the PCU
• Incorrect installation of the transfer unit or the separation unit
• Defective transfer roller
Description: Transfer roller leak error (negative electrode)
The feedback voltage of the transfer roller is insufficient.
Causes: • Defective high voltage supply board
• Loose connection of the PCU
• Incorrect installation of the transfer unit or the separation unit
• Defective transfer roller
Description: Main motor error
The main motor does not reach its operation speed within 0.7 second. Or, the main motor remains out of its operation speed for 0.7 second after reaching the operation speed.
Description: Fusing temperature warm-up error
The fusing temperature rises 7 degrees or less in two seconds; and this continues 5 times consecutively. Or, the fusing temperature is not detected within 25 or 35 seconds.
Causes: • Defective thermistor
• Incorrect installation of the thermistor
• Defective fusing lamp
• Defective power supply unit