Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP2001L — Trang 11/13

Code: 669

Description: EEPROM communication error. Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
Causes: • Caused by noise • Defective EEPR

Code: 681

Description: Device ID is not identified. (D158/D159) Retry of ID tag communication fails three times after the machine has detected the ID tag error.
Causes: • Caused by noise • Defective controller board

Code: 687

Description: Memory address command error (D158/D159)
From among the I/F commands with the controller, the image transfer available report (for each command) cannot be received.
Causes: • Caused by noise • Defective controller board

Code: 692

Description: Controller board communication abnormal (D160/D161/D170)
Communication error between the printer part of the controller board and BICU.
Causes: • The connector is abnormal between the controller board and the BICU board.

Code: 694

Description: Controller board communication abnormal (D160/D161/D170)
Communication error between the scanner part of the controller board and BICU.
Causes: • The connector is abnormal between the controller board and the BICU board.

Code: 701-03

Description: Paper feed motor driver error (ARDF) (D158/D159)
Causes:

Code: 701-08

Description: Paper exit motor driver error (ARDF) (D158/D159
)Error signal from the motor driver
Causes: • Loose connection • Defective encoder • Motor overload • Worn-out motor

Code: 702-01

Description: Protected element block error 1 (ARDF) (D158/D159)
Protected element block is detected.
Causes: • Defective motor • Defective solenoid • Harness shorted
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie