Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP2014D — Trang 7/9

Code: 551-02

Description: Thermistor (edge) disconnection: Low voltage • An error is detected only when the input voltage at power-on is low. • Temperature of 0°C or lower is detected for 25 seconds continuously. Detection time: 10 or more Detection interval: 0.1 seconds
Causes: • Thermistor (edge) disconnection • Thermistor (edge) not connected correctly
Remedy: • Reconnect the thermistor (edge). • Replace the thermistor (edge). • Clear this SC by executing SP5-810-001.

Code: 553-00

Description: Thermistor (edge) high temperature detection: Software • Temperature above 230°C is detected for 1 second continuously. • Detection with the thermistor (edge) Detection time: 10 or more Measurement interval: 0.1 sec
Causes: • Triac short-circuit • MPU defective
Remedy: • Replace the MPU. • Clear this SC by executing SP5-810-001.

Code: 554-00

Description: Thermistor (edge) high temperature detection: Hardware Temperature of 250°C or higher is detected by the thermistor (edge).
Causes: • Triac short-circuit • MPU defective • Fusing control error
Remedy: • Replace the MPU. • Clear this SC by executing SP5-810-001.

Code: 557-00

Description: Zero cross frequency exceeded When low frequency is detected once, this SC is issued.
Causes: Power line noise
Remedy: Turn the power off and on.

Code: 559-00

Description: Fusing jam SC. A fusing jam, which does not reach the paper exit sensor, is detected three times consecutively. • If paper exits normally (passes the paper exit sensor), the count will be cleared. • This detection is effective only when the setting of SP1-159-001 (Fusing jam 3 times SC setting) is set to “1 (on)”. (Default: 0 (off)) • The fusing jam counter value is retained after turning the power off/on. • The fusing jam counter (internal counter) is reset when the setting of SP1-159-001 is changed from "1" to "0". • The fusing jam counter is reset when clearing this SC after SC559-00 has been issued.
Causes: Paper winding around the fusing roller.
Remedy: • Replace the fusing unit. • Clear this SC by executing SP5-810-001.

Code: 622-00

Description: 2nd tray communication error • An error occurs during the line connection between the mainframe and the optional PFU (2nd tray). • A communication error report is received between the mainframe and the optional PFU (2nd tray) is received.
Causes: • The 2nd paper tray's main board defective • MPU defective • 2nd tray and the machine are not connected correctly.
Remedy: • Reconnect the 2nd tray connection cable. • Replace MPU. • Replace the 2nd tray.

Code: 623-00

Description: 3rd tray communication error • An error occurs during the line connection between the mainframe and the optional PFU (3rd tray). • A communication error report is received between the mainframe and the optional PFU (3rd tray).
Causes: • 2nd tray main board defective • 3rd tray main board defective • 2nd tray and 3rd tray not connected correctly
Remedy: • Reconnect the 2nd tray and 3rd tray connection cable. • Replace the 3rd tray.

Code: 669-01

Description: EEPROM communication error – Access-type designation error
Causes: When the machine retries three times after an error report has been received in the EEPROM communication, but the machine does not recover the communication, this SC is issued. • Noise • EEPROM not connected • EEPROM mounted in reverse • EEPROM defective
Remedy: EEPROM not connected: • Reinstall the EEPROM on the MPU. EEPROM mounted in reverse: • Mount the EEPROM correctly on the MPU. EEPROM defective: • Replace the EEPROM on the MPU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie