Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP201SPF — Trang 3/13

Code: 401

Description: Transfer roller leak error (positive electrode)
The feedback voltage of the transfer roller is insufficient.
Causes: • Defective high voltage supply board
• Loose connection of the PCU
• Incorrect installation of the transfer unit or the separation unit
• Defective transfer roller

Code: 402

Description: Transfer roller leak error (negative electrode)
The feedback voltage of the transfer roller is insufficient.
Causes: • Defective high voltage supply board
• Loose connection of the PCU
• Incorrect installation of the transfer unit or the separation unit
• Defective transfer roller

Code: 500

Description: Main motor error
The main motor does not reach its operation speed within 0.7 second. Or, the main motor remains out of its operation speed for 0.7 second after reaching the operation speed.
Causes: • Overload
• Defective main motor

Code: 541

Description: Fusing thermistor open error
The fusing temperature remains lower than the specified temperature by 20 degrees Celsius.
Causes: • Defective thermistor
• Incorrect installation of the thermistor
• Defective power supply unit
• Loose connectors

Code: 542

Description: Fusing temperature warm-up error
The fusing temperature rises 7 degrees or less in two seconds; and this continues 5 times consecutively. Or, the fusing temperature is not detected within 25 or 35 seconds.
Causes: • Defective thermistor
• Incorrect installation of the thermistor
• Defective fusing lamp
• Defective power supply unit

Code: 543

Description: Fusing overheat error 1
The fusing temperature detected by the thermistor is 230°C or higher for one second.
Causes: • Defective thermistor
• Defective power supply unit

Code: 544

Description: Fusing overheat error 2
The fusing temperature detected by the monitor circuit is 250°C or higher for one second.
Causes: • Defective thermistor
• Defective power supply unit

Code: 545

Description: Fusing lamp overheat error
After the fusing temperature reaches the target, the fusing lamp remains on for 12 seconds.
Causes: • Defective thermistor
• Incorrect installation of the thermistor
• Defective power supply unit
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie