Description: HDD data encryption error Encryption of data on the hard disk failed.
Causes: • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD
Remedy: [8] B HDD check error: The HDD is not correctly installed. • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD 1. Install the HDD correctly. 2. Initialize the HDD. [9] B Power loss during encryption • Power failure during the data encryption Format the HDD. [10] Data read/write error • The DMAC error is detected twice or more. See SC863 below.
Code: 860
Description: HDD error 1 The hard disk connection is not detected because it is defective or has not been formatted
Causes: • Cable between HDC and HDD loose or defective • HDD power connector loose or defective • HDD not formatted • HDD defective
Remedy: 1. Check the cable between HDC and HDD. 2. Reformat the HDD. 3. Replace the HDD. 4. Replace the controller board.
Code: 861
Description: HDD error 2 The HDD did not enter the ready status within 30 sec. after power on.
Causes: • Cable between HDC and HDD loose or defective • Cable between HDC and HDD loose or defective • HDD power connector loose or defective • HDD defective
Remedy: 1. Check the cable between HDC and HDD. 2. Reformat the HDD. 3. Replace the HDD. 4. Replace the controller board.
Code: 862
Description: Bad sector number error The number of bad sectors in the HDD (image data area) goes over 101
Causes: • Defective HDD
Remedy: 1. Format the HDD with SP5-832-002. 2. Replace the HDD.
Code: 863
Description: HDD error 3 Startup without HD data lead. Data stored on the hard disk is not read correctly, due to a bad sector on the HDD.