Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP2550 — Trang 16/17

Code: 901

Description: Mechanical total counter error
The counter was removed during standby or while it is operating, possibly damaging he connector.
Causes: • Check the connection of the mechanical counter • Counter defective

Code: 920

Description: Printer Error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective • Insufficient memory

Code: 921

Description: Printer error 2
When the application started, the necessary font was not on the SD card.
Causes: • Font not on the SD card

Code: 925

Description: Network File Error
The file that manages NetFile is corrupted and operation cannot continue.
Causes: • Software defective • Files on the HDD corrupted

Code: 990

Description: Software performance error
The software attempted to perform an unexpected operation due to: 1) software bug, 2) incorrect internal parameter, 3) insufficient working memory.
Causes: • Turn the machine power off/on • Reinstall the controller and/or main firmware Note: When this SC occurs, the file name, address, and data will be stored in NVRAM. This information can be checked by using SP7-403. Note the above data and the situation in which this SC occurs. Then report the data and conditions to your technical control center.

Code: 991

Description: Software continuity error
The software attempted to perform an unexpected operation. However, unlike SC990, the object of the error is continuity of the software.
Causes: • No operation required. Note: This SC code does not appear on the panel, and is only logged.

Code: 992

Description: Unexpected Software Error
Software encountered an unexpected operation not defined under any SC code.
Causes: • Software defective • An error undetectable by any other SC code occurred

Code: 997

Description: Application function selection error
Application selected by the operator did not start or end normally due to a software problem. An option required by the application may not be installed.
Causes: • Confirm which devices are required for the application. • Make sure all devices are configured correctly. • If the problem is with the fax unit, the nesting of the fax group may be too complicated
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie