Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP2852 — Trang 12/22

Code: 791

Description: Bridge unit error
The machine recognizes the finisher, but does not recognize the bridge unit.
Causes: • Defective connector • Broken harness
Remedy: 1. Check the connections between the bridge unit and the machine. 2. Install a new bridge unit.

Code: 792

Description: Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
Causes: • Defective connector • Defective harness • Incorrect installation
Remedy: 1. Check the connections between the finisher and the machine. 2. Install a new finisher.

Code: 793-01, 794-01

Description: Front jogger motor error 1-bin tray (D586)
The machine does not detect a correct signal from the front jogger fence HP sensor while the front jogger motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective front jogger motor • Loosen connection • Motor overload • Defective front jogger fence HP sensor
Remedy: 1. Replace the front jogger fence HP sensor. 2. Replace the front jogger motor.

Code: 793-02, 794-02

Description: Rear jogger motor error 1-bin tray (D586)
The machine does not detect a correct signal from the rear jogger fence HP sensor while the rear jogger motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective rear jogger motor • Loosen connection • Motor overload • Defective rear jogger fence HP sensor
Remedy: 1. Replace the rear jogger fence HP sensor. 2. Replace the rear jogger motor.

Code: 793-03, 794-03

Description: Pick-up roller contact motor error 1-bin tray (D586)
The machine does not detect a correct signal from the pick-up roller HP sensor while the pick-up roller contact motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective pick-up roller contact motor • Loosen connection • Motor overload • Defective pick-up roller HP sensor
Remedy: 1. Replace the pick-up roller HP sensor. 2. Replace the pick-up roller contact motor.

Code: 793-04, 794-04

Description: Exit guide plate motor error 1-bin tray (D586)
The machine does not detect a correct signal from the exit guide plate HP sensor while the exit guide plate motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective exit guide plate motor • Loosen connection • Motor overload • Defective exit guide plate HP sensor
Remedy: 1. Replace the exit guide plate HP sensor. 2. Replace the exit guide plate motor.

Code: 793-05, 794-05

Description: Output tray motor error with 1-bin tray (D586)
The machine does not detect a correct signal from the stack height detection lever sensor while the output tray motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective output tray motor • Loosen connection • Motor overload • Defective stack height detection lever sensor
Remedy: 1. Replace the stack height detection lever sensor. 2. Replace the output tray motor.

Code: 793-06, 794-06

Description: Stack height detection lever motor error with 1-bin tray (D586)
The machine does not detect a correct signal from the stack height detection lever HP sensor while the stack height detection lever motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective stack height detection lever motor • Loosen connection • Motor overload • Defective stack height detection lever HP sensor • Defective stack height detection lever sensor
Remedy: 1. Replace the stack height detection lever sensor. 2. Replace the output tray motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie