Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP3351 — Trang 2/17

Code: 144-2

Description: SBU serial communication error
Poor SBU power supply caused by SIO, or BCU detection board defective.
Causes: • Harness connection at IPU, BCU, SBU loose, broken, defective. • Spurious electrical noise on power supply line • IPU defective • BCU defective • SBU defective

Code: 144-3

Description: SBU GASBU reset error
SBU defective, BCU detection circuit defective.
Causes: • Harness connection at IPU, BCU, SBU loose, broken, defective. • Spurious electrical noise on power supply line • IPU defective • BCU defective • SBU defective

Code: 144-4

Description: SBU version error
SBU defective, BCU detection circuit defective.
Causes: • Harness connection at IPU, BCU, SBU loose, broken, defective. • Spurious electrical noise on power supply line • IPU defective • BCU defective • SBU defective

Code: 161

Description: IPU Error
The self-diagnostic test detected an error at the IPU at power on, or after the machine returned from energy save mode.
Causes: • Harness between SBU and IPU loose or broken • IPU defective • SBU defective

Code: 165

Description: Copy Data Security Unit error
An error occurred when the machine attempted to recognize the Copy Data Security Unit board.
Causes: • Check installation of Copy Data Security (CDS) Unit • CDS unit not correct type for the machine • CDS unit defective

Code: 202

Description: Polygon motor error 1: ON timeout
The polygon mirror motor did not reach the targeted operating speed within 10 sec. after turning on or changing speed
Causes: • Polygon motor/driver board harness loose or broken • Polygon motor/driver board defective • Laser optic unit defective • IPU defective

Code: 203

Description: Polygon motor error 1: OFF timeout
The polygon mirror motor did not leave READY status within 3 sec. after polygon motor switched off.
Causes: • Polygon motor/driver board harness loose or broken • Polygon motor/driver board defective • Laser optic unit defective • IPU defective

Code: 204

Description: Polygon motor error 1: XSCRDY signal error
The XSCRDY signal remained HIGH for 200 ms while the LD unit was firing.
Causes: • Polygon motor/driver board harness loose or broken • Polygon motor/driver board defective • Laser optic unit defective • IPU defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie