• Code: 636-01
• Description: IC Card Error: External authentication module error
  This SC is generated if the external authentication is enabled and following condition occurs: • No external authentication module • SD card error or external authentication module broken • No DESS module
• Causes:

• Code: 636-02
• Description: IC Card Error: Version error
  The version of the external authentication module is not correct.
• Causes: • Incorrect module version

• Code: 636-99
• Description: IC Card Error: Management area error
  The management number of the external authentication module exceeds the maximum limit.
• Causes: • Software error

• Code: 641
• Description: BICU communication error
  The BICU does not respond to the frame transmitted from the controller.
• Causes: • Defective controller • Detective BICU

• Code: 650-001
• Description: Communication error of the remote service modem (Embedded RCG-M): Authentication error
  The authentication for the Embedded RCG-M fails at a dial up connection.
• Causes: • Incorrect SP settings • Disconnected telephone line • Disconnected modem board Check and set the correct user name (SP5816-156) and password (SP5816-157).

• Code: 650-004
• Description: Communication error of the remote service modem (Embedded RCG-M): Incorrect modem setting
  Dial up fails due to the incorrect modem setting.
• Causes: • Same as -001 Check and set the correct AT command (SP5816-160).

• Code: 650-005
• Description: Communication error of the remote service modem (Embedded RCG-M): Communication line error
  The supplied voltage is not sufficient due to a defective communication line or defective connection.
• Causes: • Same as -001 Consult with the user's local telephone company.

• Code: 650-011
• Description: Communication error of the remote service modem (Embedded RCG-M): Incorrect network setting
  Both the NIC and Embedded RCG-M are activated at the same time.
• Causes: • Same as -001 Disable the NIC with SP5985-1.