Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP4002SP — Trang 17/24

Code: 791

Description: Bridge unit error
The machine recognizes the finisher, but does not recognize the bridge unit.
Causes: • Defective connector • Broken harness

Code: 792

Description: Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
Causes: • Defective connector • Defective harness • Incorrect installation

Code: 816

Description: Energy save I/O sub-system error
Energy saver sub-system detects an error.
Causes: • Defective controller board

Code: 817

Description: Monitor Error
This is a file detection and electronic file signature check error when the boot loader attempts to read the self-diagnostic module, system kernel, or root system files from the OS Flash ROM, or the items on the SD card in the controller slot are false or corrupted.
Causes: • OS Flash ROM data defective; change the controller firmware • SD card data defective; use another SD card

Code: 818

Description: Watchdog timer error
The watchdog timer detect the error even if system processing normally.
Causes: System program defective
Controller board defective
Optional board defective

Code: 819

Description: Fatal kernel error
Due to a control error, a RAM overflow occurred during system processing. One of the following messages was displayed on the operation panel.
Causes: • System program defective • Controller board defective
• Optional board defective • Replace controller firmware

Code: 820

Description: Self-diagnostics error: CPU [XXXX]: Detailed error code
CPU error
Causes: • System firmware problem • Defective controller

Code: 821

Description: Self-diagnostics error: ASIC
Causes: [0B00] ASIC error The write-&-verify check error has occurred in the ASIC. • Defective ASIC device Replace the controller board. [0D05] Self-diagnosis error: ASIC The CPU checks if the ASIC timer works correctly compared with the CPU timer. If the ASIC timer does not function in the specified range, this SC code is displayed. • System firmware problem • Defective RAM-DIMM • Defective controller Replace the controller board. [50A1] Video bridge device (ASIC) error 1 The CPU does not detect the video bridge device. • Defective I/F between the video bridge device and controller [50A2] Video bridge device (ASIC) register error 1 The CPU detects the video bridge device, but detects error data from the video bridge device. • Defective I/F between the video bridge device and controller
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie