Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP4002SP — Trang 12/24

Code: 672

Description: Controller-to-operation panel communication error at startup
• After the machine is powered on, the communication between the controller and the operation panel is not established, or communication with controller is interrupted after a normal startup. • After startup reset of the operation panel, the attention code or the attention acknowledge code is not sent from the controller within 15 seconds. • After the controller issues a command to check the communication line with the controller at 30-second intervals, the controller fails to respond twice.
Causes: • Controller stalled • Controller board installed incorrectly • Controller board defective • Operation panel connector loose or defective • The controller is not completely shutdown when you turn the main switch off. Check the setting of SP5875-001. If the setting is set to "1 (OFF)", change it to "0 (ON)".

Code: 674

Description: Transmission error in controller board
Video transmission error is detected in the controller board.
Causes: Defective Controller Board

Code: 687

Description: Memory address (PER) command error
The BICU does not receive a memory address command from the controller for the prescribed time after the paper has reached the registration sensor.
Causes: • Harness Disconnection at BICU • Controller board loose or broken • Defective BICU • Defective Controller Board

Code: 700-01

Description: Scanner feeding error 1: Pick-up roller HP error
When the pick-up motor turns on counterclockwise, the pick-up roller HP sensor does not detect the home position of the pick-up roller.
Causes: Defective pick-up roller HP sensor
Defective pick-up motor
Defective DF drive board

Code: 700-02

Description: Scanner feeding error 1: Original stopper HP error
When the pick-up motor turns on clockwise, the original stopper HP sensor does not detect the home position of the original stopper.
Causes: Defective original stopper HP sensor
Defective pick-up motor
Defective DF drive board

Code: 700-12

Description: Scanner feeding error 1: DF fan motor 1 error
DF fan motor lock signal is detected after the original transportation has finished.
Causes: Turn the main switch off and on.

Code: 701-02

Description: Scanner feeding error 2: Pick-up motor driver error
The error flag of the pick-up motor driver IC is asserted when the jam error is issued.
Causes: Pick-up motor driver detected an error.

Code: 701-03

Description: Scanner feeding error 2: Paper feed motor error
The error flag of the paper feed motor driver IC is asserted when the jam error is issued.
Causes: Pick-up motor driver detected an error.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie