Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP6000 — Trang 18/25

Code: 763

Description: Punch movement motor error
Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code
Causes: • Motor harness disconnected, loose, defective
• Motor defective

Code: 764

Description: Paper position sensor slide motor error
Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective
• Motor defective

Code: 765

Description: Folding unit bottom fence lift motor
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code
Causes: • Motor harness disconnected, loose, defective
• Motor defective

Code: 766

Description: Clamp roller retraction motor error
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code
Causes: • Motor harness disconnected, loose, defective
• Motor defective

Code: 767

Description: Stack junction gate motor error
Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective
• Motor overload
• Motor defective

Code: 770

Description: Cover interposer tray bottom plate motor error
• After the motor starts to raise the bottom plate, the bottom plate position sensor does not detect the plate at the specified time (3 s).
• After the motor starts to lower the bottom plate, the bottom plate HP sensor does not detect the bottom plate
Causes: • Bottom plate position sensor, disconnected, defective
• Bottom plate HP sensor disconnected, defective

Code: 780

Description: Z-Fold feed motor error
The feed motor does not attain the prescribed speed within the specified time.
Causes: • Feed motor disconnected, defective
• Feed motor overloaded due to obstruction
• Feed motor lock

Code: 781

Description: Z-Fold lower stopper motor
The lower stopper motor does not attain the prescribed speed within the specified time.
Causes: • Lower stopper motor disconnected, defective
• Lower stopper motor overloaded due to obstruction
• Lower stopper HP sensor disconnected, defec
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie