Description: Punch movement motor error
Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code
Causes: • Motor harness disconnected, loose, defective
• Motor defective
Description: Paper position sensor slide motor error
Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective
• Motor defective
Description: Stack junction gate motor error
Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective
• Motor overload
• Motor defective
Description: Cover interposer tray bottom plate motor error
• After the motor starts to raise the bottom plate, the bottom plate position sensor does not detect the plate at the specified time (3 s).
• After the motor starts to lower the bottom plate, the bottom plate HP sensor does not detect the bottom plate
Causes: • Bottom plate position sensor, disconnected, defective
• Bottom plate HP sensor disconnected, defective
Description: Z-Fold lower stopper motor
The lower stopper motor does not attain the prescribed speed within the specified time.
Causes: • Lower stopper motor disconnected, defective
• Lower stopper motor overloaded due to obstruction
• Lower stopper HP sensor disconnected, defec
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.