Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC2503 — Trang 43/45

Code: SC915-05

Description: External Controller Error 6(Unable to communicate with GW controller because of an error)
Causes: Notification from external application (external controller)
Remedy: Replace the Egret controller board.

Code: SC919-00

Description: External controller down While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, of BREAK signal from the other station was detected.
Causes: External controller and the machine had been operating correctly (*) but the external controller was turned off or rebooted, or the video bus was disconnected. * Printing or scanning using the external controller.
Remedy: Turn the main power off/on.

Code: SC920-00

Description: Printer application error (No response at PM startup). When an error is detected in the application, which makes continued operation impossible.
Causes: • Software bug • Unexpected hardware configuration (such as insufficient memory)
Remedy: Turn the main power off/on.

Code: SC920-01

Description: Printer application error (Timeout during PM operation). When an error is detected in the application, which makes continued operation impossible.
Causes: • Software bug • Unexpected hardware configuration (such as insufficient memory)
Remedy: Turn the main power off/on.

Code: SC920-02

Description: Printer application error (Unable to obtain work memory) When an error is detected in the application, which makes continued operation impossible.
Causes: • Software bug • Unexpected hardware configuration (such as insufficient memory)
Remedy: Turn the main power off/on.

Code: SC920-03

Description: Printer application error (Unable to start filter process). When an error is detected in the application, which makes continued operation impossible.
Causes: • Software bug • Unexpected hardware configuration (such as insufficient memory)
Remedy: Turn the main power off/on.

Code: SC920-04

Description: Printer application error (Abnormal termination of filter process). When an error is detected in the application, which makes continued operation impossible.
Causes: • Software bug • Unexpected hardware configuration (such as insufficient memory)
Remedy: Turn the main power off/on.

Code: SC921-00

Description: Printer application error (Resident font not found) Resident font was not found at printer startup.
Causes: Preinstalled font files not found.
Remedy: Turn the main power off/on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie