Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC3003SP — Trang 22/45

Code: SC650-13

Description: Remote Service Modem Communication Error (RC Gate Type Mwas installed but modem is not present (detected during operation) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because it can be referenced using SP).
Causes: RC Gate Type Mwas installed but modem is not present (detected during operation)
Remedy: • If a modem board is not installed, install it. • Check again if the modem driver configurations (SP5-816-160, SP5-816-165 to 171, SP5-816-165 to 171) are correct. • If the problem is not solved, replace the modem.

Code: SC650-14

Description: Remote Service Modem Communication Error (RC Gate Type N was installed but modem is present or wired/wireless LAN is not working correctly) • An error related to communication (dialup connection, modem board etc.) using the RC Gate was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because it can be referenced using SP).
Causes: RC Gate Type N was installed but modem is present or wired/wireless LAN is not working correctly
Remedy: • If a modem board is attached, remove it. • Check if wired/wireless LAN works.

Code: SC651-01

Description: Illegal Remote Service Dial-up (Chat program parameter error) An unexpected error occurred when RC Gate Type M dialed up the NRS Center.
Causes: Software bug
Remedy: Logging only.

Code: SC651-02

Description: Illegal Remote Service Dial-up (Chat program execution error) An unexpected error occurred when RC Gate dialed up the NRS Center.
Causes: Software bug
Remedy: Logging only.

Code: SC652-00

Description: Remote service ID2 mismatching There was an authentication mismatch between ID2 for Remote, the controller board, and NVRAM.
Causes: • Used controller board installed • Used NVRAM installed (such action is not allowed.)
Remedy: • If this occurs during RC Gate installation: Check the validity of the certificate and the NVRAM, check the machine serial number, write the common certificate, and then begin installation again. • If this occurs after RC Gate installation: Clear the RC Gate install status, check the validity of the certificate and the NVRAM, check the machine serial number, write the common certificate, and then begin installation again.

Code: SC653-00

Description: Incorrect remote service ID2 ID2 stored in the NVRAM has either of the following problems. • Number of characters is not 17. • Includes a character that cannot be printed. • All spaces • NULL
Causes: Replace the NVRAM
Remedy: Clear the RC Gate install status, write the common certificate, and then begin installation again.

Code: SC664-01

Description: ASIC on the IOB SRAM program expansion error. Access permission error to ASIC on the IOB SRAM (write permission fails)
Causes: • Noise • Hardware defection
Remedy: • Replace the imaging IOB and paper transport IOB • Check the harness

Code: SC664-02

Description: ASIC on the IOB SRAM program expansion error. Write error to ASIC on the IOB SRAM (write result error)
Causes: • Noise • Hardware defection
Remedy: • Replace the imaging IOB and paper transport IOB • Check the harness
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie