Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC3003SP — Trang 26/45

Code: SC702-01

Description: Protection Device Intercept Error 1 (ARDF) When original source 5V power supply is ON, protection device intercept of 24V power supply system is detected.
Causes: Any of feed motor, transport motor, reverse solenoid, paper feed solenoid, paper feed clutch and FAN motor defective, a harness shortcircuit occurs, and the protection device of the 24V power supply system intercepts.
Remedy: • Replace the blown fuse or circuit board • Replace the short-circuited parts

Code: SC702-02

Description: Protection Device Intercept Error 2 (ARDF) When original source 5V power supply is ON, protection device intercept of 24V OUT power supply system is detected.
Causes: Solenoid defective or harness short-circuit occurs in 24VOUT power supply system.
Remedy: • Replace the blown fuse or circuit board • Replace the short-circuited parts

Code: SC702-03

Description: Protection Device Intercept Error 3 (ARDF) When original source 5V power supply is ON, protection device intercept of 5VE power supply system is detected.
Causes: Sensor defective or a harness short-circuit occur in 5VE power supply system.
Remedy: • Replace the blown fuse or circuit board • Replace the short-circuited parts

Code: SC702-04

Description: Protection Device Intercept Error 4 (1-pass ADF) Motor defective in any of the pickup motor, completion stamp, base plate motor or FAN motor, or a harness short-circuit occurs, and the protection device of the non-interlocking power supply system intercepts.
Causes: Motor defective or a harness short-circuit occurs in the non-interlocking power supply system.
Remedy: • Replace the blown fuse or circuit board • Replace the short-circuited parts

Code: SC702-05

Description: Protection Device Intercept Error 5 (1-pass ADF) Motor defective in the paper feed motor, pullout motor, intermediate motor, scanner motor or paper exit motor, or a harness short-circuit occurs, and the protection device of the interlocking power supply system intercepts.
Causes: Motor defective or a harness short-circuit occurs in the interlocking power supply system.
Remedy: • Replace the blown fuse or circuit board • Replace the short-circuited parts

Code: SC720-03

Description: Protection Device Intercept Error 1 (2K/3K sheet finisher) Protection device intercept error state (fuse break) is detected.
Causes: • Short-circuit defective • Overload defective • Motor defective • Solenoid defective
Remedy: • Check the harness • Replace the controller • Replace the motor • Replace the solenoid

Code: SC720-10

Description: Entrance Transport Motor Error (2K/3K sheet finisher) Motor driver detects an error state (DC motor control error). (1st time is jam notification, 2nd time is SC notification)
Causes: • Motor defective • Connector disconnected • Overload • Encoder defective
Remedy: • Check the motor connection • Replace the motor • Replace the controller

Code: SC720-11

Description: Horizontal Transport Motor Error (2K/3K sheet finisher) Motor driver detects an error state (DC motor control error). (1st time is jam notification, 2nd time is SC notification)
Causes: • Motor defective • Connector disconnected • Overload • Encoder defective
Remedy: • Check the motor connection • Replace the motor • Replace the controller
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie