Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC306 — Trang 22/29

Code: 840-00

Description: EEPROM access error • During the I/O processing, a reading error occurred. The 3rd reading failure causes this SC code. • During the I/O processing, a writing error occurred.
Causes: • Defective EEPROM
Remedy:

Code: 841-00

Description: EEPROM read data error. Mirrored data of the EEPROM is different from the original data in EEPROM.
Causes: Data in the EEPROM is overwritten for some reason.
Remedy:

Code: 842-01

Description: Insufficient Nand-Flash blocks (threshold exceeded) At startup, or when machine returned from low power mode, the Nand-Flash status was read and judged that the number of unusable blocks had exceeded threshold, and then SCS generated the SC code.
Causes: Number of unusable blocks exceeded threshold for Nand-Flash
Remedy: Replace the controller board.

Code: 842-02

Description: Number of Nand-Flash block deletions exceeded At startup, or when the machined returned from low power mode, the Nand-Flash was read and judged that the number of deleted blocks had exceeded threshold, and then SCS generated this SC code.
Causes: Number of blocks deleted exceeded threshold for Nand-Flash
Remedy: Replace the controller board.

Code: 853-00

Description: Bluetooth device connection error The Bluetooth hardware (USB type) was connected after the machine was turned on.
Causes: The Bluetooth hardware (USB type) was connected after the machine was turned on.
Remedy: Always connect the Bluetooth device (USB type) before the machine is turned on.

Code: 854-00

Description: Bluetooth device disconnected The Bluetooth hardware (USB type) was disconnected after the machine was turned on.
Causes: The Bluetooth hardware (USB type) was disconnected after the machine was turned on.
Remedy: Never remove Bluetooth (USB type) after machine starts

Code: 855-01

Description: Wireless LAN board error (driver attachment failure) Wireless LAN board error (wireless LAN card: 802.11 is covered)
Causes: • Defective wireless LAN board • Loose connection
Remedy: • Cycle the main power off and on. • Replace wireless LAN board

Code: 855-02

Description: Wireless LAN board error (driver initialization failure) Wireless LAN board error (wireless LAN card: 802.11 is covered)
Causes: • Defective wireless LAN board • Loose connection
Remedy: • Cycle the main power off and on. • Replace wireless LAN board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie