Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC4501 — Trang 21/26

Code: 763

Description: Punch movement motor error
The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the punch movement motor. 2. Replace the punch movement motor

Code: 764

Description: Paper position sensor slide motor error
The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the paper position sensor slide motor. 2. Replace the paper position sensor slide motor.

Code: 765

Description: Fold unit bottom fence motor error
The bottom fence of the fold unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the fold unit bottom fence motor. 2. Replace the fold unit bottom fence motor.

Code: 766

Description: Clamp roller retraction motor error
The clamp roller retraction motor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the clamp roller retraction motor motor. 2. Replace the clamp roller retraction motor motor.

Code: 767

Description: Stack junction gate motor error
The stack junction gate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the stack junction gate motor. 2. Replace the stack junction gate.

Code: 770

Description: Shift motor error The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
Causes: • Defective shift motor • Defective shift motor HP sensor
Remedy: 1. Check the connections to the shift motor and the shift motor HP sensor. 2. Replace the shift motor or the shift motor HP sensor.

Code: 791

Description: Bridge unit error
The machine recognizes the finisher, but does not recognize the bridge unit.
Causes: • Defective connector • Broken harness
Remedy: 1. Check the connections between the bridge unit and the machine. 2. Install a new bridge unit.

Code: 792

Description: Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
Causes: • Defective connector • Defective harness • Incorrect installation
Remedy: 1. Check the connections between the finisher and the machine. 2. Install a new finisher.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie