Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC4502 — Trang 22/30

Code: 720-70

Description: 1000/2000/3000-sheet (booklet) finisher: Tray lift motor error
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. The upper tray paper height sensor does not change its status with the specified time after the tray raises or lowers.
Causes: • Motor overload • Loose connection of the shift tray motor • Defective shift tray motor
Remedy: 1. Check the connections to the shift tray motor. 2. Replace the shift tray motor.

Code: 720-71

Description: Finisher Tray 1 shift motor error
The shift roller HP sensor of the upper tray does not activate within the prescribed time after the shift tray starts to move toward or away from the home position. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Shift tray HP sensor of the upper tray disconnected, defective • Shift tray motor of the upper tray is disconnected, defective • Shift tray motor of the upper tray overloaded due to obstruction
Remedy: 1. Check the connections and cables for the components mentioned above. 2. Check for blockages in shift motor mechanism. 3. Replace the shift tray HP sensor and/or shift motor 4. Replace the finisher main board.

Code: 720-75

Description: Stacking sponge roller motor
Occurs during the operation of the stacking sponge roller motor.
Causes: • Disconnected, looser or defective motor harness • Motor overloaded • Disconnected, loose or defective sensor harness • Defective stacking sponge roller motor • Defective stacking roller HP sensor
Remedy: 1. Check the connections of the stacking sponge roller motor. 2. Check the connections of the stacking sponge roller HP sensor. 3. Replace the stacking sponge roller motor. 4. Replace the stacking sponge roller HP sensor.

Code: 720-80

Description: Punch movement motor error
The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the punch movement motor. 2. Replace the punch movement motor

Code: 720-81

Description: Paper position sensor slide motor error
The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the paper position sensor slide motor. 2. Replace the paper position sensor slide motor.

Code: 722-10

Description: Paper feed motor error: proof tray
Motor driver error signal is output.
Causes: • Motor harness disconnected, loose, defective • Defective motor • Overload on the motor
Remedy: 1. Check the connections to the paper feed motor. 2. Replace the paper feed motor.

Code: 722-14

Description: Paper feed motor error: lower tray
Motor driver error signal is output.
Causes: • Motor harness disconnected, loose, defective • Defective motor • Overload on the motor
Remedy: 1. Check the connections to the paper feed motor. 2. Replace the paper feed motor.

Code: 722-17

Description: Paper feed motor error: inner tray
Motor driver error signal is output.
Causes: • Motor harness disconnected, loose, defective • Defective motor • Overload on the motor
Remedy: 1. Check the connections to the paper feed motor. 2. Replace the paper feed motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie