Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC4503SP — Trang 7/45

Code: SC324-01

Description: Development motor: Bk: Lock Lock signals are observed at 2 sec intervals during motor ON, and a High level is detected at least 20 times
Causes: • Motor defective • Connector disconnected • Harness broken • IOB defective • Unit torque increased
Remedy: • Replace the motor • Reconnect the connector • Replace the harness • Replace the IOB • Replace the unit • Replace the driven unit

Code: SC324-05

Description: Development motor: CMY: Lock Lock signals are observed at 2 sec intervals during motor ON, and a High level is detected at least 20 times
Causes: • Motor defective • Connector disconnected • Harness broken • IOB defective • Unit torque increased
Remedy: • Replace the motor • Reconnect the connector • Replace the harness • Replace the IOB • Replace the unit

Code: SC360-01

Description: TD sensor adjustment error (K) During TD sensor initialization, the TD sensor output voltage (Vt) cannot be adjusted to the target range (target value +- 0.2V, SP3-030-031 to 034) for 3 times consecutively.
Causes: • TD sensor defective • Loose connection • Harness broken • Developer toner density differs from initial developer
Remedy: • Replace the development unit.

Code: SC360-02

Description: TD sensor adjustment error (C) During TD sensor initialization, the TD sensor output voltage (Vt) cannot be adjusted to the target range (target value +- 0.2V, SP3-030-031 to 034) for 3 times consecutively.
Causes: • TD sensor defective • Loose connection • Harness broken • Developer toner density differs from initial developer
Remedy: • Replace the development unit.

Code: SC360-03

Description: TD sensor adjustment error (M) During TD sensor initialization, the TD sensor output voltage (Vt) cannot be adjusted to the target range (target value +- 0.2V, SP3-030-031 to 034) for 3 times consecutively.
Causes: • TD sensor defective • Loose connection • Harness broken • Developer toner density differs from initial developer
Remedy: • Replace the development unit.

Code: SC360-04

Description: TD sensor adjustment error (Y) During TD sensor initialization, the TD sensor output voltage (Vt) cannot be adjusted to the target range (target value +- 0.2V, SP3-030-031 to 034) for 3 times consecutively.
Causes: • TD sensor defective • Loose connection • Harness broken • Developer toner density differs from initial developer
Remedy: • Replace the development unit.

Code: SC361-01

Description: TD sensor output error: Upper Limit (K) TD sensor output: Vt (SP3-210-001 to 004) > output upper limit error threshold (SP3-211-002) continuously exceeded the upper limit occurrence threshold value (SP3-211-003).
Causes: TD sensor connector dropout (connection fault)
Remedy: 1. TD sensor connector missing check 2. Check whether there is any error in the TD sensor harness (disconnection, etc.) 3. If the sensor is defective, replace the development unit.

Code: SC361-02

Description: TD sensor output error: Upper Limit (C) TD sensor output: Vt (SP3-210-001 to 004) > output upper limit error threshold (SP3-211-002) continuously exceeded the upper limit occurrence threshold value (SP3-211-003).
Causes: TD sensor connector dropout (connection fault)
Remedy: 1. TD sensor connector missing check 2. Check whether there is any error in the TD sensor harness (disconnection, etc.) 3. If the sensor is defective, replace the development unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie