Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC5501 — Trang 23/26

Code: 857

Description: USB interface error The USB interface cannot be used due to a driver error.
Causes: • Defective USB driver • Loose connection
Remedy: Replace the controller board.

Code: 858

Description: HDD Encryption unit error 1
A serious error occurs when data is encrypted to update an encryption key with the HDD encryption unit.
Causes: [0] Encryption key acquisition error: The controller fails to get a new encryption key. • Defective controller board 1. Replace the controller board. [1] Encryption key setting for HDD error: The controller fails to copy a new encryption key to the HDD. • Defective SATA chip on the controller board 1. Replace the controller board. [2] NVRAM data encryption error 1: An error occurs while the NVRAM data is encrypted. • Defective SATA chip on the controller board 1. Replace the controller board. [30] NVRAM data encryption error 2: An error occurs before the NVRAM data is encrypted. • Defective controller board 1. Replace the controller board. [31] Other error: A serious error occurs while the data is encrypted. Same as SC991
Remedy:

Code: 859

Description: HDD Encryption unit error 2
A serious error occurs when the HDD data is encrypted to update an encryption key with the HDD encryption unit.
Causes: [8] HDD check error: The HDD is not correctly installed. • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD 1. Install the HDD correctly. 2. Initialize the HDD. [9] Power failure during the data encryption: The data encryption (NVRAM and HDD) has not been completed. • Power failure during the data encryption 1. Initialize the HDD. [10] Data read/write error: The DMAC error is detected twice or more. • Same as SC863
Remedy:

Code: 860

Description: HDD: Initialization error
The controller detects that the hard disk fails.
Causes: • HDD not initialized • Defective HDD
Remedy: 1. Reformat the HDD. 2. Replace the HDD.

Code: 861

Description: HDD: Reboot error
The HDD does not become ready within 30 seconds after the power is supplied to the HDD.
Causes: • Loose connection • Defective cables • Defective HDD • Defective controller
Remedy: 1. Check the connection between the HDD and controller. 2. Check and replace the cables. 3. Replace the HDD. 4. Replace the controller.

Code: 863

Description: HDD: Read error
The data stored in the HDD cannot be read correctly.
Causes: • Defective HDD • Defective controller
Remedy: 1. Replace the HDD. 2. Replace the controller.

Code: 864

Description: HDD: CRC error
While reading data from the HDD or storing data in the HDD, data transmission fails.
Causes: • Defective HDD
Remedy: 1. Replace the HDD.

Code: 865

Description: HDD: Access error
An error is detected while operating the HDD.
Causes: • Defective HDD
Remedy: 1. Replace the HDD.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie