Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC5502A — Trang 28/30

Code: 880

Description: File format converter error
A request to get access to the file format converter is not answered within the specified time.
Causes: • Defective file format converter
Remedy: 1. Replace the file format converter.

Code: 881

Description: Authentication area error
Authentication application error is detected.
Causes: Error data in an authentication application reaches the management limit.
Remedy: 1. Turn the main power switch off and on.

Code: 899

Description: Software performance error
If the processing program shows abnormal performance and the program is abnormally ended, this SC is issued.
Causes: • Controller board defective • Software defective
Remedy: 1. Replace the controller board. 2. Turn the main switch off and on. 3. Update the firmware on the controller.

Code: 900

Description: Electric counter error
Abnormal data in the counters.
Causes: • Defective NVRAM • Defective controller
Remedy: 1. Check the connection between the NVRAM and controller. 2. Replace the NVRAM. 3. Replace the controller board.

Code: 910...914

Description: External Controller Error
Causes: The external controller alerted the machine about an error.
Remedy: 1. Please refer to the instructions for the external controller (application).

Code: 915

Description: External Controller Error 6
Egrt board error
Causes: The external controller alerted the machine about an error.
Remedy: 1. Replace the Egret controller board.

Code: 919

Description: External Controller down
While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, or BREAK signal from the other station was detected.
Causes: • Power outage at the EFI controller • EFI controller was rebooted • Connection to EFI controller loose
Remedy: 1. Turn the main power switch off and on.

Code: 920

Description: Printer application error -00 No response when starting up the PM -01 Timeout error during the PM operation -02 Working memory error -03 Cannot start-up the filtering process -04 Abnormal exit from the filtering process
Causes: An error is detected in the printer application program and operation cannot continue. • Defective software • Unexpected hardware resource (e.g., memory shortage)
Remedy: 1. Software defective; turning on and off the main power switch 2. Insufficient memory; additional memory
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie