• Code: SC460
• Description: Separation power pack output error
  This SC is issued if the VBCU detects a short in the transfer power pack.
• Causes: • Damaged insulation on the high-voltage supply cable (replace cable) • Damaged insulation around the transfer power pack

• Code: SC465
• Description: Image Transfer Roller End: K
  The machine detected an abnormal reading of the resistance of the transfer roller because it is near the end of its service life.
• Causes: • Check the connections between the transfer roller power pack the roller • Replace image transfer roller • Image transfer power pack defective

• Code: SC466
• Description: Image Transfer Roller End: M
  The machine detected an abnormal reading of the resistance of the transfer roller because it is near the end of its service life.
• Causes: • Check the connections between the transfer roller power pack the roller • Replace image transfer roller • Image transfer power pack defective

• Code: SC467
• Description: Image Transfer Roller End: C
  The machine detected an abnormal reading of the resistance of the transfer roller because it is near the end of its service life.
• Causes: • Check the connections between the transfer roller power pack the roller • Replace image transfer roller • Image transfer power pack defective

• Code: SC468
• Description: Image Transfer Roller End: Y
  The machine detected an abnormal reading of the resistance of the transfer roller because it is near the end of its service life.
• Causes: • Check the connections between the transfer roller power pack the roller • Replace image transfer roller • Image transfer power pack defective

• Code: SC472
• Description: ITB Bias Roller End
  The machine detected an abnormal reading of the resistance of the ITB bias roller because it is near the end of its service life.
• Causes: • Check the connections between the transfer power pack • Replace image transfer roller • Transfer power pack defective

• Code: SC480
• Description: Drum cleaning motor error: K
  The drum cleaning motor failed to switch on (motor lock), or failed to reach the required speed within the prescribed time.
• Causes: • Motor block by physical obstruction • Motor harness loose, broken, defective • Motor defective

• Code: SC481
• Description: Drum cleaning motor error: M
  The drum cleaning motor failed to switch on (motor lock), or failed to reach the required speed within the prescribed time.
• Causes: • Motor block by physical obstruction • Motor harness loose, broken, defective • Motor defective