• Code: SC532
• Description: Controller fan error
  The lock signal remained HIGH for 5 sec. while the fan that cools the printed circuit boards was operating.
• Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

• Code: SC533
• Description: Fusing unit suction fan error
  The lock signal remained HIGH for 5 sec. while the fan that draws air out of the fusing unit was operating.
• Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

• Code: SC534
• Description: Duplex unit fan error
  The lock signal remained HIGH for 5 sec. while the fan that draws air out of the duplex unit was operating.
• Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

• Code: SC535
• Description: Development Intake Fan Error
  The lock signal remained HIGH for 5 sec. while the fan in the Y development unit was operating
• Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

• Code: SC536
• Description: Development Intake Fan Error: Y
  The lock signal remained HIGH for 5 sec. while the fan in the development unit was operating.
• Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

• Code: SC537
• Description: Development Intake Fan Error: C
  The lock signal remained HIGH for 5 sec. while the fan in the development unit was operating.
• Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

• Code: SC538
• Description: Development Intake Fan Error: M
  The lock signal remained HIGH for 5 sec. while the fan in the development unit was operating.
• Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

• Code: SC539
• Description: Development Intake Fan Error: K
  The lock signal remained HIGH for 5 sec. while the fan in the development unit was operating.
• Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged