• Code: 796-46
• Description: Rotate-to-Binding Position Sensor (S42) Error PB (D391) The main grip rotate-to-binding position sensor did not go ON within the prescribed time after the main grip rotation motor turned on to rotate the grip unit and signature to the vertical. -or- The main grip rotate to binding position sensor did not go OFF within the prescribed time after the main grip rotation motor turned to rotate the main grip unit to the left for delivery of the signature from the sub grip unit.
• Causes: • Main Grip Rotation Motor (M21) defective • Rotate to Binding Position Sensor (S42) defective • Motor or sensor connector loose, broken, defective
• Remedy:

• Code: 796-47
• Description: Main Grip Rotation Dual Sensor Errors PB (D391) Main Grip Rotate HP Sensor (S43) and Rotate-to-Binding Position Sensor (S42) went ON at the same time.
• Causes: • Main Grip Rotate HP Sensor (S43) defective • Rotate to Binding Position Sensor (S42) defective • Sensor connector loose, broken, defective
• Remedy:

• Code: 796-48
• Description: Main Grip Open/Close Sensor: Rear (S47, S48) PB (D391)
• Causes: The rear main grip open sensor did not go ON within the prescribed time after the rear grip motor turned on to open the main grip unit. -or- The rear main grip open sensor did not go OFF within the prescribed time after the rear grip motor turned on to close the main grip unit. • Grip Motor: Rear (M23) defective • Main Grip Open Sensor: Rear (S47) defective • Motor or sensor connector loose, broken, defective The rear main grip close sensor did not go ON within the prescribed time after the rear grip motor turned on to close the main grip unit. -or- The rear main grip close sensor did not go OFF within the prescribed time after the rear grip motor turned on to open the main grip unit. • Grip Motor: Rear (M23) defective • Main Grip Close Sensor: Rear (S54) defective • Motor or sensor connector loose, broken, defective
• Remedy:

• Code: 796-49
• Description: Main Grip Encoder: Rear Sensor (S46) Error PB (D391) The rear main grip encoder sensor could not be detected ON/OFF within the prescribed time after the rear grip motor turned on to open and close the main grip unit.
• Causes: • Grip Motor: Rear (M23) defective • Main Grip Encoder: Rear Sensor (S46) defective • Motor or sensor connector loose, broken, defective
• Remedy:

• Code: 796-5
• Description: Spine Fold Close Sensor: Left (S61) Error PB (D391) The sensor did not turn ON within the prescribed time, or the sensor was already OFF when the spine fold plate was supposed to move from the closed to the open position. -or- The sensor did not go OFF within the prescribed time after the spine fold plate motor: left turned on to open the spine fold plate, or the sensor was already ON when the spine fold plate was supposed to move from the open to the closed position.
• Causes: • Spine fold plate motor: left (M28) defective • Spine fold close sensor: left (S61) defective • Sensor connector loose, broken, defective
• Remedy:

• Code: 796-50
• Description: Rear Main Group Dual Sensor Error PB (D391) Main Grip Open Sensor: Rear (S47) and Main Grip Close Sensor: Rear (S48) went ON at the same time.
• Causes: • Main Grip Open Sensor: Rear (S47) defective • Main Grip Close Sensor: Rear (S48) defective • A sensor connector loose, broken, defective
• Remedy:

• Code: 796-51
• Description: Main Grip Open/Close Sensor: Front (S51, S53) PB (D391)
• Causes: The front main grip open sensor did not go ON within the prescribed time after the front grip motor turned on to open the main grip unit. -or- The front main grip open sensor did not go OFF within the prescribed time after the front grip motor turned on to close the main grip unit. • Grip Motor: Front (M24) defective • Main Grip Open Sensor: Front (S51) defective • Motor or sensor connector loose, broken, defective The front main grip close sensor did not go ON within the prescribed time after the front grip motor turned on to close the main grip unit. -or- The front main grip close sensor did not go OFF within the prescribed time after the front grip motor turned on to open the main grip unit. • Grip Motor: Front (M24) defective • Main Grip Close Sensor: Front (S53) defective • Motor or sensor connector loose, broken, defective
• Remedy:

• Code: 796-52
• Description: Main Grip Encoder: Front Sensor (S52) Error PB (D391) The front main grip encoder sensor could not be detected ON/OFF within 200 ms after the front grip motor turned on to open/close the main grip unit.
• Causes: • Main Grip Encoder: Front Sensor (S52) defective • Grip Motor: Front (M24) defective • Main Grip Encoder: Front Sensor (S52) defective • Sensor or motor connector loose, broken, defective
• Remedy: