Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Pro C720S — Trang 82/85

Code: 853

Description: Wireless LAN card not detected The wireless LAN card is not detected before communication is established, though the wireless LAN board is detected.
Causes: • Loose connection
Remedy: Check the connection.

Code: 854

Description: Wireless LAN/Bluetooth card not detected The wireless LAN/Bluetooth card is not detected after communication is established, but the wireless LAN board is detected.
Causes: • Loose connection
Remedy: Check the connection.

Code: 855, 856

Description: Wireless LAN/Bluetooth card error An error is detected in the wireless LAN/Bluetooth card.
Causes: • Loose connection • Defective wireless LAN/Bluetooth card
Remedy: 1. Check the connection. 2. Replace the wireless LAN/Bluetooth card.

Code: 857

Description: USB interface error The USB interface cannot be used due to a driver error.
Causes: • Defective USB driver • Loose connection
Remedy: 1. Check the connection. 2. Replace the USB board.

Code: 858

Description: Data Encryption Error 1 These are errors of the HDD Data Encryption Option D377.
Causes: 0 Key Acquistion Key could be acquired. • Replace the controller board 1 HDD Key Setting Error The key was acquired but the HDD could not be set. • Turn the machine power off/on several times. • Replace the controller board. 2 NVRAM Read Error NVRAM data conversion failed (mismatch with nvram.conf) • Replace the NVRAM 30 NVRAM Before Replace Error DFU. May occur during development. • Turn the machine power off/on several times. • Replace the controller board.
Remedy:

Code: 859

Description: Data Encryption Error 2 These are errors of the HDD Data Encryption Option D377.
Causes: 8 HDD Check Error Data conversion was attempted with no HDD unit present. • Confirm that HDD unit installed correctly • Initialize HDD with SP5832-1 Note: After installation, a new HDD should be formatted with SP5832-1 9 Power Loss During Data Conversion Data conversion stopped before NVRAM/HDD data was converted. • Format HDD with SP5832-1 10 Data Read Command Error More than two illegal DMAC communications were returned. • HDD defective • Format HDD with SP5832-1 • Replace HDD
Remedy:

Code: 860

Description: HDD: Initialization error The controller detects that the hard disk fails.
Causes: • HDD not initialized • Defective HDD
Remedy: 1. Reformat the HDD. 2. Replace the HDD.

Code: 861

Description: HDD: Reboot error The HDD does not become ready within 30 seconds after the power is supplied to the HDD.
Causes: • Loose connection • Defective cables • Defective HDD • Defective controller
Remedy: 1. Check the connection between the HDD and controller. 2. Check and replace the cables. 3. Replace the HDD. 4. Replace the controller.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie