• Code: 792-15
• Description: Ring Binder (D392) Timing sensor interval error The bind timing sensor (S702) remained ON or OFF longer than the prescribed time (1500 ms) during initialization or ring binding (1st detection: jam, 2nd detection: SC error)
• Causes: • Clamp unit motor (M701) connector loose, broken, defective • Motor overload • Motor defective • Bind timing sensor (S702) connector loose, broken, defective • Sensor defective
• Remedy:

• Code: 792-16
• Description: Ring Binder (D392) Clamp unit HP error At initialization or during ring binding, did not arrive at the home position within the prescribed time (1500 ms) (1st detection: jam, 2nd detection: SC error) -or- Detected at HP after the time prescribed to leave the HP had elapsed (more than 1500 ms) (1st detection, jam, 2nd detection, SC error)
• Causes: • Clamp unit motor (M701) connector loose, broken, defective • Motor overload • Motor defective • Clamp unit HP sensor (S701) connector loose, broken, defective • Sensor defective
• Remedy:

• Code: 792-17
• Description: Ring Binder (D392) Spine alignment error During pin alignment operation, the pin did not reach the up position or return to the home position with the prescribed time (400 ms), and one retry failed within the same time limit.
• Causes: • Alignment pin motor (M602) connector loose, broken, defective • Motor overload • Motor defective • Alignment pin HP sensor (S604) connector loose, broken, defective, or sensor defective • Alignment pin up sensor (S610) connector loose, broken, defective, or sensor defective • Stack not jogged correctly, or not punched correctly
• Remedy:

• Code: 792-18
• Description: Ring Binder (D392) Binder unit not detected The binder unit could not be detected at initialization.
• Causes: • Drawer connector loose, broken, defective • Drawer connector defective
• Remedy:

• Code: 792-19
• Description: Ring Binder (D392) Output belt unit rotation error Detected at HP after the time prescribed to leave the HP had elapsed (more than 800 pulses) (1st detection, jam, 2nd detection, SC error) -or- Not detected at HP after the time prescribed to arrive at the HP had elapsed (more than 2300 pulses) (1st detection, jam, 2nd detection, SC error)
• Causes: • Output belt rotation motor (M403) connector loose, broken, defective • Motor overload • Motor defective • Output belt rotation HP sensor (S403) connector loose, broken, defective • Sensor defective
• Remedy:

• Code: 792-2
• Description: Ring Binder (D392) Pre-punch side fence HP error Detected at HP after the time prescribed to leave the HP had elapsed (more than 400 pulses) (1st detection, jam, 2nd detection, SC error) -or- Not detected at HP after the time prescribed to arrive at the HP had elapsed (more than 600 pulses) (1st detection, jam, 2nd detection, SC error)
• Causes: • Side jogger motor (M302) connector loose, broken, defective • Motor overload • Motor defective • Pre-punch jogger HP sensor (S301) connector loose, broken, defective • Sensor (S301) defective
• Remedy:

• Code: 792-20
• Description: Ring Binder (D392) Output belt 1 HP error Detected at HP after the time prescribed to leave the HP had elapsed (more than 200 pulses) (1st detection, jam, 2nd detection, SC error) -or- Not detected at HP after the time prescribed to arrive at the HP had elapsed (more than 2125 pulses) (1st detection, jam, 2nd detection, SC error)
• Causes: • Output belt 1 motor (M401) connector loose, broken, defective • Motor overload • Motor defective • Output belt 1 HP sensor (S401) connector loose, broken, defective • Sensor defective
• Remedy:

• Code: 792-21
• Description: Ring Binder (D392) Output belt 2 HP error Detected at HP after the time prescribed to leave the HP had elapsed (more than 200 pulses) (1st detection, jam, 2nd detection, SC error) -or- Not detected at HP after the time prescribed to arrive at the HP had elapsed (more than 3130 pulses) (1st detection, jam, 2nd detection, SC error)
• Causes: • Output belt 2 motor (M402) connector loose, broken, defective • Motor overload • Motor defective • Output belt 2 HP sensor (S402) connector loose, broken, defective • Sensor defective
• Remedy: