• Code: 360
• Description: Low toner density error: K. The output from the TD sensor for a color exceeds 3.5V or more during image processing.
• Causes: • Insufficient toner • Disconnected or defective harness • Defective TD sensor
• Remedy: 1. Replace the toner bottle. 2. Check the harness connection. 3. Replace the TD sensor.

• Code: 361
• Description: Low toner density error: C. The output from the TD sensor for a color exceeds 3.5V or more during image processing.
• Causes: • Insufficient toner • Disconnected or defective harness • Defective TD sensor
• Remedy: 1. Replace the toner bottle. 2. Check the harness connection. 3. Replace the TD sensor.

• Code: 362
• Description: Low toner density error: M. The output from the TD sensor for a color exceeds 3.5V or more during image processing.
• Causes: • Insufficient toner • Disconnected or defective harness • Defective TD sensor
• Remedy: 1. Replace the toner bottle. 2. Check the harness connection. 3. Replace the TD sensor.

• Code: 363
• Description: Low toner density error: Y. The output from the TD sensor for a color exceeds 3.5V or more during image processing.
• Causes: • Insufficient toner • Disconnected or defective harness • Defective TD sensor
• Remedy: 1. Replace the toner bottle. 2. Check the harness connection. 3. Replace the TD sensor.

• Code: 364
• Description: High toner density error: K. The output from the TD sensor for a color goes below 1.5V during image processing.
• Causes: • Too much toner • Disconnected or defective harness • Defective TD sensor
• Remedy: 1. Print a job without toner supply (Set the SP setting of 2-252 to "0"). 2. Replace the developer. 3. Replace the TD sensor. 4. Replace the development unit.

• Code: 365
• Description: High toner density error: C. The output from the TD sensor for a color goes below 1.5V during image processing.
• Causes: • Too much toner • Disconnected or defective harness • Defective TD sensor
• Remedy: 1. Print a job without toner supply (Set the SP setting of 2-252 to "0"). 2. Replace the developer. 3. Replace the TD sensor. 4. Replace the development unit.

• Code: 366
• Description: High toner density error: M. The output from the TD sensor for a color goes below 1.5V during image processing.
• Causes: • Too much toner • Disconnected or defective harness • Defective TD sensor
• Remedy: 1. Print a job without toner supply (Set the SP setting of 2-252 to "0"). 2. Replace the developer. 3. Replace the TD sensor. 4. Replace the development unit.

• Code: 367
• Description: High toner density error: Y. The output from the TD sensor for a color goes below 1.5V during image processing.
• Causes: • Too much toner • Disconnected or defective harness • Defective TD sensor
• Remedy: 1. Print a job without toner supply (Set the SP setting of 2-252 to "0"). 2. Replace the developer. 3. Replace the TD sensor. 4. Replace the development unit.