Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SP1200S — Trang 5/6

Code: A2

Description: The document is too long. (During scanning, 90 cm or longer of a document is detected.)
Causes: Document rear actuator not operating smoothly or catching in some position.
Remedy: 1 Document rear actuator not operating smoothly or catching in some position. Ensure smooth operation and that there is no catching of document rear actuator.

Code: A3

Description: Document rear sensor is not turned on when feeding the document.
Causes: Document rear actuator not operating smoothly or catching in some position. Document rear sensor failure. ADF motor failure
Remedy: 1 Document rear actuator not operating smoothly or catching in some position. Ensure smooth operation and that there is no catching of document rear actuator. 2 Document rear sensor failure. Replace the document rear sensor. 3 ADF motor failure Replace the ADF motor.

Code: A5

Description: Fax scanning error (First warning only)
Causes: Scanning failure.
Remedy: 1 Scanning failure Turn the power switch off and on. Then, try scanning again.

Code: A6

Description: Fax scanning error (After the A5 error occurs, the same problem occurs again even after turning the power off and on.)
Causes: FB unit failure. Main PCB failure.
Remedy: 1 FB unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY.

Code: AD

Description: DMA transfer error
Causes: FB unit failure. Main PCB failure.
Remedy: 1 FB unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY

Code: AF

Description: FB unit home position failure
Causes: FB unit failure. Main PCB failure.
Remedy: 1 FB unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY.

Code: B0

Description: Harness for scanning is not connected correctly.
Causes: Scanner harness not connected correctly. Scanner harness broken. Main PCB failure
Remedy: 1 Scanner harness not connected correctly. Reconnect the scanner harness correctly. 2 Scanner harness broken Replace the FB unit. 3 Main PCB failure Replace the main PCB ASSY.

Code: B7

Description: Detection error of scanner (Scanning reference voltage adjustment malfunction.)
Causes: FB unit failure. Main PCB failure.
Remedy: 1 FB unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie