Description: Fusing Unit Third Jam Error (Fatal Error) (c3)
Causes: The exit sensor failed to detect the leading edge of the paper within the prescribed time and triggered a jam alert. • After this error has occurred three times, the machine will shut down automatically and cannot be re-started until the machine has been serviced by a service technician.
Remedy: • Check the paper transport path for any physical obstructions (paper scraps, etc.) • Make sure the fusing unit has been installed correctly
Description: Low input voltage (-21 and -27 model only)
Causes: When the input voltage is extremely low (Lower than 140V).
Remedy: • Can be reset by turning the power OFF/ON. • Use high quality power supply. • Execute "Fuser SC Reset" after solving a fusing unit problem. Otherwise, the machine will continue to issue this SC code and cannot be operated.