Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SP4100SF — Trang 7/8

Code: 868

Description: SD card error 3: SC card access
An error occurred while an SD card was used.
Causes: • SD card not inserted correctly • SD card defective • Controller board defective • Note: If you want to try to reformat the SC card, use SD Formatter Ver 1.1.

Code: 870

Description: Address book data errord access
Address book data on the hard disk was detected as abnormal when it was accessed from either the operation panel or the network. The address book data cannot be read from the HDD or SD card where it is stored, or the data read from the media is defective.
Causes: • HDD defective. • Initialize the HDD with SP5832. If this does not solve the problem, replace the HDD and initialize with SP5832. Note: If you turn off the machine while the HDD is being accessed, this can damage the HDD.

Code: 872

Description: HDD mail receive data error
The machine detected that the HDD was not operating correctly at power on. The machine detected that the HDD was not operating correctly (could neither read nor write) while processing incoming email
Causes: • HDD defective. • Initialize the HDD with SP5832. If this does not solve the problem, replace the HDD and initialize with SP5832. Note: If you turn off the machine while the HDD is being accessed, this can damage the HDD.

Code: 873

Description: HDD mail send data error
An error was detected on the HDD immediately after the machine was turned on, or power was turned off while the machine used the HDD.
Causes: • HDD defective • Initialize the HDD with SP5832. If this does not solve the problem, replace the HDD and initialize with SP5832. Note: If you turn off the machine while the HDD is being accessed, this can damage the HDD.

Code: 874

Description: Delete All error 1: HDD
A data error was detected for the HDD/NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card.
Causes: • Turn the main switch off/on and try the operation again. • Install the Data Overwrite Security Unit again. For more, see section “1. Installation”. • HDD defective

Code: 875

Description: Delete All error 2: Data area
An error occurred while the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card.
Causes: • Turn the main switch off/on and try the operation again.

Code: 876

Description: Log data abnormal
An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
Causes: • Software error. Update the firmware • NVRAM defective • HDD defective

Code: 880

Description: File Format Converter (MLB) error
A request to get access to the MLB was not answered within the specified time.
Causes: • MLB defective, replace the MLB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie