Causes: [0301] Verification error Error detected during a write/verify check for the optional RAM (SDRAM DIMM). • Loose connection • Defective SDRAM DIMM • Defective controller Turn the main switch off and on. Replace the SDRAM DIMM. Replace the controller. [0302] Memory structure data error The memory structure data error for the optional RAM (SDRAM DIMM) is detected when the self-diagnostic is executed. • Defective RAM DIMM • Defective SPD ROM on RAM DIMM • Defective 12C bus. Replace the RAM DIMM.
Causes: [0F30] [0F31] ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the bridge board. [0F41] ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the bridge board. [50B1] Could not initialize or read the bus connection. Check for loose connections at the mother board. Replace the bridge board. [50B2] Value of the SSCG register is incorrect. Check for loose connections at the mother board. Replace the bridge board.
Causes: [2701] A verify error occurred when setting data was read from the clock generator via the I2C bus. • Defective clock generator • Defective I2C bus • Defective I2C port on the CPU Replace the controller board.
Causes: [9001] USB NAND Flash ROM cannot be read. • Defective controller board [9101] The ID of the USB NAND Flash ROM cannot be read. • Defective controller board [9110] The USB NAND Flash ROM controller is disconnected. • Defective controller board
Description: EEPROM error 1: EEPROM access • During the I/O processing, a reading error occurred. The 3rd reading failure causes this SC code. • During the I/O processing, a writing error occurred.
Description: Nand-Flash update VerifyError SCS detected abnormal writing (verifying Error) in the module which is written in Nand-Flash on the time of ROM remote update or ROM update.
Causes: • This SC is logged at 1st error detection.SC819 is issued at 2nd error detection. • SC819 is issued at 2nd error detection. Defective Nand-Flash (controller board)
Remedy:
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.