Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC232DN — Trang 3/4

Code: 557

Description: Zero Cross Frequency Error
The detection error occurs ten times consecutively in ten zero cross signal detections. This error is defined when the detected zero cross signal is 17 or less/27 or more for 0.2 seconds.
Causes: Defective fusing lamp relay. Unstable input power source.
Remedy: 1. Check the power supply source. 2. Replace the fusing unit. • Execute "Engine Maintenance Menu" to recover the printer after completing the recovery procedure. Otherwise, the printer continues to issue this SC code and cannot be operated.

Code: 559

Description: Consecutive Fusing Jam
The paper jam counter for the fusing unit reaches 3. The paper jam counter is cleared if the paper is fed correctly. This SC is activated only when this function is enabled with "Engine Maintenance" (default "OFF").
Causes: Defective fusing unit. Defective fusing control.
Remedy: 1. Clear this SC to send a command after a jam removal. 2. Turn off this function after a jam removal. • Execute "Engine Maintenance Menu" to recover the printer after completing the recovery procedure. Otherwise, the printer continues to issue this SC code and cannot be operated.

Code: 669

Description: EEPROM Error
An unexpected value exists in the initialization flag of the EEPROM.
Causes: EEPROM not initialized. Defective EEPROM.
Remedy: 1. Initialize the EEPROM. 2. Replace the EEPROM. 3. Replace the EGB.

Code: 690

Description: GAVD Communication Error
The ID of the GAVD is not identified during initialization.
Causes: Defective EGB
Remedy: 1. Replace the EGB.

Code: 819

Description: Service Cycle Power
Incorrect combination of EGB and controller board. An unexpected error occurs in the EEPROM on the controller board
Causes: Controller board defective
Remedy: 1. Install the correct EGB and controller boards for this printer. 2. Replace the controller board

Code: 823

Description: USB/ Network Device Error
An interface error in the USB connection or NIB connection occurs.
Causes: Controller board detective
Remedy: 1. Replace the controller board.

Code: 824

Description: EEPROM Error
An EEPROM check error at power-on occurs.
Causes: Controller board detective
Remedy: 1. Replace the controller board.

Code: 827

Description: On-Board Memory Check Error
An on-board memory check error at power-on occurs.
Causes: Controller board detective
Remedy: 1. Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie