Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC252DN — Trang 4/4

Code: 559

Description: Consecutive Fusing Jam The paper jam counter for the fusing unit reaches 3. The paper jam counter is cleared if the paper is fed correctly. This SC is activated only when this function is enabled with "Engine Maintenance" (default "OFF").
Causes: • Defective fusing unit • Defective fusing control
Remedy: 1. Clear this SC to send a command after a jam removal. 2. Turn off this function after a jam removal. • Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated.

Code: 669

Description: EEPROM Error An unexpected value exists in the initialization flag of the EEPROM
Causes: • EEPROM not initialized • Defective EEPROM
Remedy: 1. Initialize the EEPROM. 2. Replace the EEPROM. 3. Replace the EGB.

Code: 690

Description: GAVD Communication Error The ID of the GAVD is not identified during initialization. The chip ID of the GAVD cannot be detected by the machine at power-on.
Causes: • Defective EGB
Remedy: 1. Replace the EGB.

Code: 819

Description: Service Cycle Power • Incorrect combination of EGB and controller board. • An unexpected error occurs in the EEPROM on the controller board.
Causes: • Controller board defective
Remedy: 1. Install the correct EGB and controller boards for this machine. 2. Replace the controller board

Code: 823

Description: USB/ Network Device Error An interface error in the USB connection or NIB connection occurs.
Causes: • Controller board detective
Remedy: 1. Replace the controller board.

Code: 824

Description: EEPROM Error An EEPROM check error at power-on occurs.
Causes: • Controller board detective
Remedy: 1. Replace the controller board.

Code: 827

Description: On-Board Memory Check Error An on-board memory check error at power-on occurs.
Causes: • Controller board detective
Remedy: 1. Replace the controller board.

Code: 828

Description: ROM Checksum Error
Causes: A ROM checksum error at power-on occurs.
Remedy: 1. Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie