Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC320DN — Trang 8/9

Code: 875

Description: Delete All error 2: Data area
An error occurred when the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit running from the DOS SD card.
Causes: • Turn the main switch off/on and try the operation again.
Remedy:

Code: 876

Description: Log data errors
Causes: 876-1 Log data error 1 An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating. • Initialize the HDD with SP5832-4 876-2 Log data error 2 HDD encryption unit not installed. • Install the HDD encryption unit. 876-3 Log data error 3 Invalid log encryption key due to defective NVRAM data. • Initialize the HDD with SP5832-4 • Request customer's system administrator to disable HDD encryption with the User Tool. 876-4 Log data error 4 Erratic HDD encryption due to defective NVRAM data. • Initialize HDD with SP5832-4 876-5 Log data error 5 • Re-install the previous NVRAM or HDD. • Initialize the HDD with SP5832-4. 876-99 Log data error 6 An error other than Log Data Errors 1 to 5 occurred. • Request assistance from your supervisor.
Remedy:

Code: 877

Description: Security SD card error
An error occurred, preventing successful execution of the Data Overwrite Security function, even though it has been set up and enabled.
Causes: • Security card is not inserted completely into the SD card slot • Security card has been removed from the SD card slot. • Security card is damaged. Note: • If the SD card has been removed (or was not installed correctly), switch the machine off, insert the SD card, then switch on the machine again. • If the SD card has been damaged, procure a new SD card, replace the NVRAM, then do the DOS and HDD encryption installation.
Remedy:

Code: 878

Description: TPM authentication error
The system firmware could not be authenticated by the TMP security chip.
Causes: • System firmware updated incorrectly. • Flash ROM on controller board defective. • Replace controller board.
Remedy:

Code: 900

Description: Electrical total counter error
The total counter contains something that is not a number.
Causes: • NVRAM incorrect type • NVRAM defective • NVRAM data scrambled • Unexpected error from external source
Remedy:

Code: 920

Description: Printer error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective • Turn the machine power off/on, or change the controller firmware • Insufficient memory
Remedy:

Code: 921

Description: Printer Error 2
When the printer application started, the font designated for use could not be found on the SD card.
Causes: • The font is not on the SD card
Remedy:

Code: 990

Description: Software error 1
The software performs an unexpected function and the program cannot continue.
Causes: • Firmware defective: re-boot • Update firmware
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie