Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC820DN — Trang 4/22

Code: 240

Description: LD error: Bk
The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialization
Causes: • Worn-out LD • Disconnected or broken harness of the LD
Remedy: 1. Replace the harness of the LD. 2. Replace the laser optics housing unit. 3. Replace the BCU.

Code: 241

Description: LD error: Y
The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialization
Causes: • Worn-out LD • Disconnected or broken harness of the LD
Remedy: 1. Replace the harness of the LD. 2. Replace the laser optics housing unit. 3. Replace the BCU.

Code: 242

Description: LD error: M
The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialization
Causes: • Worn-out LD • Disconnected or broken harness of the LD
Remedy: 1. Replace the harness of the LD. 2. Replace the laser optics housing unit. 3. Replace the BCU.

Code: 243

Description: LD error: C
The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialization
Causes: • Worn-out LD • Disconnected or broken harness of the LD
Remedy: 1. Replace the harness of the LD. 2. Replace the laser optics housing unit. 3. Replace the BCU.

Code: 285

Description: Line position adjustment (MUSIC) error
Line position adjustment fails four consecutive times.
Causes: • Pattern sampling error ( insufficient image density ) • Defective ID sensors for the line position adjustment • Defective image transfer belt unit • Defective PCU(s) • Defective laser optics housing unit
Remedy: 1. Check and reinstall the image transfer belt unit and PCUs. 2. Check if each toner bottle has enough toner. 3. Replace the ID sensor. 4. Replace the image transfer belt unit. 5. Replace the PCU(s). 6. Replace the laser optics housing unit.

Code: 300

Description: AC charge output error [K]
The measured voltage is not proper when IOB measures the charge output for each color.
Causes: • Disconnected or broken high voltage cable • Defective or not installed PCU • Defective high voltage power supply
Remedy: 1. Check or replace the connectors. 2. Replace the PCU for the affected colour. 3. Replace the high voltage power supply.

Code: 301

Description: AC charge output error [M]
The measured voltage is not proper when IOB measures the charge output for each color.
Causes: • Disconnected or broken high voltage cable • Defective or not installed PCU • Defective high voltage power supply
Remedy: 1. Check or replace the connectors. 2. Replace the PCU for the affected colour. 3. Replace the high voltage power supply.

Code: 302

Description: AC charge output error [C]
The measured voltage is not proper when IOB measures the charge output for each color.
Causes: • Disconnected or broken high voltage cable • Defective or not installed PCU • Defective high voltage power supply
Remedy: 1. Check or replace the connectors. 2. Replace the PCU for the affected colour. 3. Replace the high voltage power supply.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie