Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC831DN — Trang 21/24

Code: 859

Description: HDD data encryption error
Causes: -01 B HDD check error • Hard disk data conversion has been selected, but the hard disk is not installed. • The hard disk is not mounted properly. • No HDD installed • Hard disk formatting is not completed. • The encryption key on the board and the actual encryption key in the hard disk do not match. • Install the HDD correctly. • Initialize the HDD with SP5-832-001. -02 B Power failure during data encryption. The data conversion in the NVRAM or hard disk has not completed successfully. Power interruption has occurred during the conversion of the data in the NVRAM or hard disk Initialize the HDD with SP5-832-001. -10 B Data Read/Write command error Due to time-out, serial communication error, or other problems in DMAC, an irregular DMAC return value has occurred consecutively two or more times Noise or other problems in the SATA connection Same as SC863
Remedy:

Code: 860

Description: HDD startup error at main power on
HDD is connected but a driver error is detected. The driver does not respond with the HDD within 30 seconds.
Causes: HDD not initialized. Label data is corrupted. Defective HDD.
Remedy: Initialize the HDD with SP5-832-001.

Code: 863

Description: HDD: Read error
The data stored in the HDD cannot be read correctly.
Causes: A bad sector has been generated during operation.
Remedy: • Turn the main switch off and on. • Replace the HDD.

Code: 864

Description: HDD: CRC error
Causes: Defective HDD
Remedy: • Turn the main switch off and on. • Replace the HDD.

Code: 865

Description: HDD: Access error
An error is detected while operating the HDD.
Causes: Defective HDD
Remedy: • Turn the main switch off and on. • Replace the HDD.

Code: 866

Description: SD card authentication error
A correct license is not found in the SD card.
Causes: SD-card data is corrupted.
Remedy: Store correct data in the SD card.

Code: 867

Description: SD card removal has been detected.
The SD card is ejected from the slot.
Causes: The SD card for launching the application has been removed from the slot.
Remedy: Turn the main power switch off and on.

Code: 868

Description: SD card access error
An error occurs while an SD card is used.
Causes: SD card defective. Defective SD controller.
Remedy: • Format the SD card. • Check the SD card is inserted correctly. • Replace the SD card. • Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie