Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPW2470

Code: 300

Description: Charge Corona Output Error After sampling at 10 ms intervals, the charge-corona feedback voltage remained less than 0.5 V for more than 200 ms.
Causes: • Charge corona unit defective • High voltage cable defective • Corona wire dirty or defective • CGB power pack fuse, connections loose, broken, or defective • CGB power pack defective
Remedy:

Code: 305

Description: Charge Corona Wire Cleaner Error The charge wire cleaner did not: (1) come from the home position within 5 s, or (2) did return to the home position within 3.75 s due to wire cleaner overload.
Causes: • Cleaner unit blocked or damaged • Until replacement parts become available, set SP2804 to "0" to disable the charge-corona cleaning function so the machine can operate.
Remedy:

Code: 392

Description: Development Bias Error The development bias feedback voltage was less than 0.3 V for longer than 200 ms while the PWM duty value was more than 5% (indicating a development bias leak).
Causes: • Bias terminal damaged • High voltage cable damaged, defective • CGB power pack defective
Remedy:

Code: 400

Description: ID Sensor Auto Adjustment Error. Vsg did not reach 4 ±0.2 V when the ID sensor was initialized with SP3001-2.
Causes: • ID sensor dirty • ID sensor harness, connector loose, disconnected, damaged, defective • ID sensor defective • MCU defective • Development unit defective • CGB power pack defective
Remedy:

Code: 401

Description: ID Sensor Vsg Error The Vsg level was twice detected lower than 2.5 V. -or- The Vsg level was once detected higher than 4.8V.
Causes: • ID sensor dirty • ID sensor harness, connector loose, disconnected, damaged, defective • ID sensor defective • MCU defective • CGB power pack defective
Remedy:

Code: 402

Description: ID Sensor Vsp Error The Vsp level was twice detected at 0V or at more than 2.5 V.
Causes: • Under the left upper cover, make sure that the hex screw of the main drum drive gear is tight • ID sensor dirty • ID sensor harness, connector loose, disconnected, damaged, defective • ID sensor defective • MCU defective • Development unit defective • CGB power pack defective
Remedy:

Code: 440

Description: Transfer Output Error. A high voltage feedback voltage of less than 0.5 V was detected for 200 ms.
Causes: • High voltage cable disconnected, damaged • T/S power pack defective
Remedy:

Code: 460

Description: DC Separation Corona Output Error A dc separation feedback voltage of less than 0.5 V was detected after more than 200 ms.
Causes: • High voltage cable disconnected, damaged • T/S power pack defective
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie