Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B049 Aficio FX12 S-C1

Code: 101

Description: Exposure Lamp Error
Insufficient white level detected when scanning the white plate.
Causes: • Exposure lamp defective • SBU harness defective • Bad connection • Defect in optics system (dirty scanner mirror, mirror out of position, etc.) • Lamp stabilizer board (or connector) defective • Incorrect start position or length for white plate scanning • Scanner HP sensor out of position

Code: 120

Description: Scanner home position error 1
Scanner home position sensor did not detect OFF condition during initialization or copying.
Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached

Code: 121

Description: Scanner home position error 2
Scanner home position sensor did not detect ON condition during initialization or copying.
Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached

Code: 122

Description: Scanner home position error 3
Scanner home position sensor did not detect OFF condition during book or ADF scan operation.
Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached

Code: 123

Description: Scanner home position error 4
Scanner home position sensor did not detect ON condition during book or ADF scan operation.
Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached

Code: 192

Description: SBU auto-adjustment error
During SBU auto-adjustment the detected white level was out of range.
Causes: • SBU auto adjustment was not done correctly • Exposure lamp defective • SBU harness defective • Bad connection • Defect in optics system (dirty scanner mirror, mirror out of position. etc.) • Defective stabilizer board (or connector) • Incorrect start position or length for white plate scanning • Scanner HP sensor out of position

Code: 2001

Description: Printer controller self-diagnostic error
Printer controller's power-on self-diagnostic detected an error.
Causes: • Self-diagnostic error

Code: 2002

Description: Printer controller: FGATE error
Printer application returned FGATE error notification to copier.
Causes: • FGATE error
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie