Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B149 Aficio 2238C J-C1yz — Trang 14/20

Code: 747

Description: Booklet finisher lift motor error
Causes: • Defective paper height sensor • Loose connection of the paper height sensor • Defective upper limit sensor • Loose connection of the upper limit sensor • Defective lift motor • Loose connection of the lift motor • Incorrect assembling of the lift motor • Defective lift motor encoder sensor • Loose connection of the lift motor encoder sensor

Code: 748

Description: Booklet finisher backup data error
The CPU tries to write data in the EEPROM three times, but fails to write data.
Causes: • Defective EEPROM • EEPROM not installed

Code: 749

Description: Booklet finisher punch-unit communication error
Causes: • The finisher controller cannot communicate with the punch-unit controller.

Code: 750

Description: Booklet finisher punch-unit controller error
The checksum in the backup data is inconsistent.
Causes: • Defective EEPROM(on the punch-unit controller) • EEPROM not installed

Code: 751

Description: Booklet finisher punch-unit sensor error 1
The paper edge and size sensors receive the 2.5-volt light or weaker light even when the source emits 4.4-volt light.
Causes: • Defective sensors • Dirty sensors

Code: 752

Description: Booklet finisher punch-unit registration motor error
• The registration motor drives the slide unit to the rear side for 1 second. But the home position sensor does not turn on. • The registration motor drives the slide unit to the front side for 1 second. But the home position sensor does not turn off.
Causes: • Incorrect assembly of the registration motor • Loose connection of the registration motor • Defective home position sensor • Loose connection of the home position sensor

Code: 753

Description: Booklet finisher punch-unit punch motor error
• The punch motor starts to drive the punch cams. But the controller does not receive the encoder-lock signal for 60 milliseconds. • The punch motor start to drive the punch cams. But the home positions sensor does not turn on for 250 milliseconds.
Causes: • Malfunction of the punch motor • Loose connection of the punch motor • Defective home position sensor • Loose connection of the home position sensor • Loose connection of the encoder sensor • Defective encoder sensor

Code: 754

Description: Booklet finisher punch-unit sensor error 2
The A/D inputs of the sensor are not corrected by varying the D/A outputs.
Causes: • Defective sensor • Dirty sensor
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie