Description: Exposure lamp error 1
The standard white level was not detected properly when scanning the white plate.
Causes: • Exposure lamp defective • Lamp stabilizer defective • Exposure lamp connector defective • Standard white plate dirty • Scanner mirror or scanner lens out of position or dirty • SBU defective
Description: Scanner home position error 1
The scanner home position sensor does not detect the on condition during initialization or copying.
Causes: • Scanner motor defective • Scanner motor drive board defective • Scanner HP sensor defective • Harness between SBCU and HP sensor loose, disconnected, damaged • Harness between SBCU and scanner motor loose, disconnected, damaged • SBCU defective • Scanner wire, timing belt, pulley, or carriage defective
Description: Scanner home position error 2
The scanner home position sensor does not detect the off condition during initialization.
Causes: • Scanner motor defective • Scanner motor drive board defective • Scanner HP sensor defective • Harness between SBCU and HP sensor loose, disconnected, damaged • Harness between SBCU and scanner motor loose, disconnected, damaged • SBCU defective • Scanner wire, timing belt, pulley, or carriage defective
Description: Scanner HP Sensor - Error 1
The HP sensor remains on while the carriage is returning to the home position.
Causes: • Scanner motor defective • Scanner motor drive board defective • Scanner HP sensor defective • Harness between SBCU and HP sensor loose, disconnected, damaged • Harness between SBCU and scanner motor loose, disconnected, damaged • SBCU defective • Scanner wire, timing belt, pulley, or carriage defective
Description: Scanner HP sensor - Error 2
The HP sensor does not switch on after the carriage has returned to the home position.
Causes: • Scanner motor defective • Scanner motor drive board defective • Scanner HP sensor defective • Harness between SBCU and HP sensor loose, disconnected, damaged • Harness between SBCU and scanner motor loose, disconnected, damaged • SBCU defective • Scanner wire, timing belt, pulley, or carriage defective
Description: SBU auto adjust error
The machine could not acquire the white or black peak level setting at power on, or after SP4428 (SBU Auto Adjust) was done.
Causes: • Exposure lamp disconnected • There is no blank sheet of A3 size paper on the platen • White plate dirty or missing
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.