• Code: 101
• Description: Exposure Lamp Error
  The scanner has scanned the white plate, but cannot detect the white level.
• Causes: • Defective exposure lamp
  • Defective exposure lamp stabilizer
  • Defective exposure lamp connector
  • Unclean scanner mirror
  • Scanner mirror out of position
  • Defective SBU board
  • Defective SBU connector
  • Lens block out of position
  • Incorrect position or width of white plate scanning (* SP4-015)

• Code: 120
• Description: Scanner home position error 1
  The scanner home position sensor does not detect the scanner leaving the home position.
• Causes: • Defective scanner home position sensor
  • Defective scanner drive motor
  • Defective scanner home position sensor connector
  • Defective scanner drive motor connector
  • Defective BICU board

• Code: 121
• Description: Scanner home position error 2
  The scanner home position sensor does not detect the scanner coming back to the home position.
• Causes: • Defective scanner home position sensor
  • Defective scanner drive motor
  • Defective scanner home position sensor connector
  • Defective scanner drive motor connector
  • Defective BICU board

• Code: 141
• Description: SBU black level correction error
  • The automatic SBU adjustment has failed to correct the black level three times at the pre-offset adjustment.
  • The automatic SBU adjustment has failed to correct the black level ten times at the PGA adjustment.
  • The automatic SBU adjustment has failed to correct the black level ten times at the offset adjustment.
• Causes: • Defective SBU board

• Code: 142
• Description: SBU white/black level correction error
  The automatic SBU adjustment has failed to correct the white level ten times at the PGA adjustment.
• Causes: • Defective exposure lamp
  • Unclean white plate
  • Incorrect position or width of white plate scanning (* SP4-015)
  • Defective SBU board

• Code: 144
• Description: Communication Error between BICU and SBU
  The BICU cannot correctly establish communication with the SBU.
• Causes: • Loose connection of the flat cable between the BICU and the SBU
  • Defective flat cable between the BICU and the SBU
  • Defective BICU
  • Defective SBU

• Code: 145
• Description: Automatic SBU adjustment error
  The white levels of the white plate and the white paper are extraordinarily different during the Scan Auto Adjustment (* SP4-428-001).
• Causes: • Defective exposure lamp
  • Unclean white plate
  • Incorrect position or width of white plate scanning (* SP4-015)
  • Defective BICU board
  • Defective SBU board

• Code: 193
• Description: Image transfer error
  Scanned images are not transferred to the controller memory within one minute.
• Causes: • Defective BICU board
  • Defective controller board