Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh C264 DX4542 HP4-R2

Code: E-00

Description: Clamper error The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on.
Causes: Clamper drive Clamper sensors Clamper motor

Code: E-01

Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on.
Causes: Cutter drive Cutter switch Cutter motor

Code: E-02

Description: Paper Table Drive error The paper height sensor or the table lower limit sensor does not turn on within 7.5 seconds after the table motor turn on.
Causes: Table Drive Table motor Table height sensor Table lower sensor

Code: E-04

Description: Thermal Head Overheat The temperature of the thermal head is grater than 54C when the Start key is pressed.
Causes: Overheat (wait for the thermal head to cool down) Thermal head

Code: E-06

Description: Main Motor error The CPU cannot detect the master eject position sensor (drum HP) signal within 5.0 seconds after the main motor turn on.
Causes: Main motor drive Main motor Motor drive board Master eject position sensor

Code: E-09

Description: Thermal Head Thermistor Open The thermistor output voltage is over 4.9 volts.
Causes: Thermal head thermistor Thermal head connector

Code: E-10

Description: Thermal Head Energy Pulse error The CPU detects an abnormal ID signal from the thermal head energy control pulse.
Causes: Thermal head connector Thermal head MPU

Code: E-12

Description: Pressure Plate error The pressure plate home position sensor signal is not detected within 15.0 seconds after the pressure plate motor turn on.
Causes: Pressure plate drive Pressure plate motor Plate position sensors
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie