Description: HDD mail TX data error
An error was detected on the HDD immediately after the machine was turned on, or power was turned off while the machine used the HDD.
Causes: • Do SP5832-007 (Format HDD – Mail TX Data) to initialize the HDD. • Replace the HDD
Description: Delete All error 1: HDD
A data error was detected for the HDD/NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card.
Causes: • Turn the main switch off/on, and try the operation again. • Install the Data Overwrite Security Unit again. For more, see section “1. Installation”. • HDD defective
Description: Delete All error 2: Data area
An error occurred while the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card.
Causes: • Turn the main switch off/on, and try the operation again.
Description: Log data abnormal
An error was detected in the handling of the log data at power on or during machine operation. This can be caused if you turn the machine off while it is operating.