Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D008 MP3010 R-C4.5 — Trang 16/17

Code: 920

Description: Printer Error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective • Insufficient memory

Code: 921

Description: Printer error 2
When the application started, the necessary font was not on the SD card.
Causes: • Font not on the SD card

Code: 925

Description: Network File Error
The file that manages NetFile is corrupted and operation cannot continue.
Causes: • Software defective • Files on the HDD corrupted

Code: 951

Description: F-GATE error at write request
After the IPU receives an F-gate signal, it receives another F-gate signal.
Causes: • Update the controller firmware • SBCU board defective

Code: 953

Description: Scanner setting error
The IPU does not respond with the scanner setting signal required to start scanning processing.
Causes: • Update the controller firmware

Code: 954

Description: Printer setting error
The IPU does not respond with the settings that are required to start image processing by the printer.
Causes: • Replace the IPU board • Replace the controller board • Update the controller firmware

Code: 955

Description: Memory setting error
The IPU does not respond with the settings that are required to start image processing using the memory.
Causes: • Replace the IPU board • Replace the controller board • Update the controller firmware

Code: 964

Description: Printer ready error
The printer ready signal is not generated within 17 seconds after the IPU received the print start signal.
Causes: • Replace the IPU board • Replace the controller board • Download the controller firmware
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie