Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D016 Aficio Pro C900S AG-C1 — Trang 54/85

Code: 792-9

Description: Ring Binder (D392) Pre-bind jogger clamp HP error Not detected at HP after the time prescribed to arrive at the HP had elapsed (more than 400 ms) (1st detection, jam, 2nd detection, SC error) -or- Detected at HP after the time prescribed to leave the HP had elapsed (more than 400 ms) (1st detection, jam, 2nd detection, SC error)
Causes: • Spine clamp motor (M605) connector loose, broken, defective • Motor defective • Motor overload • Clamp HP sensor (S603) connector loose, broken, defective • Sensor defective
Remedy:

Code: 793-001

Description: Stacker 1: Tray Exit Roller Unit Error • The tray exit roller HP sensor does not detect the tray exit roller for 0.35 seconds at initialization. • The tray exit roller HP sensor still detects the tray exit roller for 0.3 seconds after the tray exit roller has moved to its home position.
Causes: • Tray exit roller HP sensor defective • Tray exit roller motor defective
Remedy:

Code: 793-002

Description: Stacker 1: Jogger Error • The front and rear jogger HP sensor does not detect the jogger fence for 1 second at initialization. • The front and rear jogger HP sensor still detect the jogger for 0.3 seconds after the front and rear jogger have moved to their home position.
Causes: • Front or rear jogger HP sensor defective • Front or rear jogger motor defective
Remedy: 1. Replace the front or rear jogger HP sensor. 2. Replace the front or rear jogger motor.

Code: 793-003

Description: Stacker 1: Leading Edge Jogger Error • The leading edge jogger HP sensor does not detect the jogger fence for 2.7 seconds at initialization. • The leading edge jogger HP sensor still detects the leading edge jogger for 0.3 seconds after the leading edge jogger has moved to its home position.
Causes: • Leading edge jogger HP sensor defective • Leading edge jogger motor defective
Remedy: 1. Replace the leading edge jogger HP sensor. 2. Replace the leading edge jogger motor.

Code: 793-004

Description: Stacker 1: Stack Tray Error • The tray lift motor encoder sensor does not detect any change for 0.03 seconds. • The tray position detection sensor does not detect a normal operation.
Causes: • Tray lift motor encoder sensor defective • Tray HP sensor defective • Tray full sensor defective • Tray unload position sensor defective • Tray upper limit switch defective • Tray lower limit switch defective
Remedy: 1. Replace the tray lift motor encoder sensor. 2. Replace the tray HP sensor. 3. Replace the tray full sensor. 4. Replace the tray unload position sensor. 5. Replace the tray upper limit switch. 6. Replace the tray lower limit switch.

Code: 794-001

Description: Stacker 2: Tray Exit Roller Unit Error
Causes: • Tray exit roller HP sensor defective • Tray exit roller motor defective
Remedy: 1. Replace the tray exit roller HP sensor. 2. Replace the tray exit roller motor.

Code: 794-002

Description: Stacker 2: Jogger Error
Causes: • Front or rear jogger HP sensor defective • Front or rear jogger motor defective
Remedy: 1. Replace the front or rear jogger HP sensor. 2. Replace the front or rear jogger motor.

Code: 794-003

Description: Stacker 2: Leading Edge Jogger Error
Causes: • Leading edge jogger HP sensor defective • Leading edge jogger motor defective
Remedy: 1. Replace the leading edge jogger HP sensor. 2. Replace the leading edge jogger motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie