Description: Cover Horizontal Registration Sensor: Small (S71) PB (D391) The value for the adjustment of the cover registration sensor was higher than or lower than the target range: 3.2V to 3.5V
Description: Cover Horizontal Registration Sensor: Large (S72) PB (D391) The value for the adjustment of the cover horizontal registration sensor (for large covers) was higher than or lower than the target range: 3.2V to 3.54V
Description: Book Exit Sensor (S64) Error PB (D391) The value for the adjustment of the book exit sensor was higher than or lower than the target range: 3.2V to 3.54V
Description: Leading Edge Sensor (S65) Error PB (D391) The value for the adjustment of the leading edge sensor was higher than or lower than the target range: 3.2V to 3.54V
Description: Master-to-Inserter Board Communication Error PB (D391) Communication Error at Initialization After the ConfigSet (parallel signal) went ON while the inserter connection status was being checked, the initialization did not end successfully within 5 sec. The error time exceeded three times the maximum time allowed for the initialization communication (1.5 ms).
Causes: • Inserter board connector loose, broken, defective • Inserter board defective Bookbinder-to-Inserter Communication Error A command response for the inserter was not issued within the time prescribed for the timeout. There was an overflow in memory where information required for paper feed is stored. (Master control board detection.) • Inserter control board defective • Inserter control board connector loose, broken, defective Download Error The version of the firmware on the inserter control board could not be detected at power on. • Inserter control board defective • Inserter control board connector loose, broken, defective
Description: LE Detection Sensor (S65) Error PB (D391) No book could be detected in the path for trimming (the sensor could not detect a leading edge of a book).
Causes: • The book has slipped out of the grip of the book rotation plates
Remedy:
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.