Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D016 Aficio Pro C900S AG-C1 — Trang 13/85

Code: 360

Description: Low toner density error: K. The output from the TD sensor for a color exceeds 3.5V or more during image processing.
Causes: • Insufficient toner • Disconnected or defective harness • Defective TD sensor
Remedy: 1. Replace the toner bottle. 2. Check the harness connection. 3. Replace the TD sensor.

Code: 361

Description: Low toner density error: C. The output from the TD sensor for a color exceeds 3.5V or more during image processing.
Causes: • Insufficient toner • Disconnected or defective harness • Defective TD sensor
Remedy: 1. Replace the toner bottle. 2. Check the harness connection. 3. Replace the TD sensor.

Code: 362

Description: Low toner density error: M. The output from the TD sensor for a color exceeds 3.5V or more during image processing.
Causes: • Insufficient toner • Disconnected or defective harness • Defective TD sensor
Remedy: 1. Replace the toner bottle. 2. Check the harness connection. 3. Replace the TD sensor.

Code: 363

Description: Low toner density error: Y. The output from the TD sensor for a color exceeds 3.5V or more during image processing.
Causes: • Insufficient toner • Disconnected or defective harness • Defective TD sensor
Remedy: 1. Replace the toner bottle. 2. Check the harness connection. 3. Replace the TD sensor.

Code: 364

Description: High toner density error: K. The output from the TD sensor for a color goes below 1.5V during image processing.
Causes: • Too much toner • Disconnected or defective harness • Defective TD sensor
Remedy: 1. Print a job without toner supply (Set the SP setting of 2-252 to "0"). 2. Replace the developer. 3. Replace the TD sensor. 4. Replace the development unit.

Code: 365

Description: High toner density error: C. The output from the TD sensor for a color goes below 1.5V during image processing.
Causes: • Too much toner • Disconnected or defective harness • Defective TD sensor
Remedy: 1. Print a job without toner supply (Set the SP setting of 2-252 to "0"). 2. Replace the developer. 3. Replace the TD sensor. 4. Replace the development unit.

Code: 366

Description: High toner density error: M. The output from the TD sensor for a color goes below 1.5V during image processing.
Causes: • Too much toner • Disconnected or defective harness • Defective TD sensor
Remedy: 1. Print a job without toner supply (Set the SP setting of 2-252 to "0"). 2. Replace the developer. 3. Replace the TD sensor. 4. Replace the development unit.

Code: 367

Description: High toner density error: Y. The output from the TD sensor for a color goes below 1.5V during image processing.
Causes: • Too much toner • Disconnected or defective harness • Defective TD sensor
Remedy: 1. Print a job without toner supply (Set the SP setting of 2-252 to "0"). 2. Replace the developer. 3. Replace the TD sensor. 4. Replace the development unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie