Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D020 MP3350 R-C5

Code: 101-1

Description: Exposure lamp error 1
The standard white level could not be set properly when scanning the white plate during automatic white level adjustment.
Causes: • White plate dirty • Spurious electrical noise on power supply line • Exposure lamp connection loose, broken, defective • Exposure lamp defective • Lamp stabilizer connection, loose, broken, defective • Lamp stabilizer defective • High voltage power supply harness loose, broken, defective • SBU defective • BCU defective • SIO defective

Code: 101-2

Description: Exposure lamp error 1
The standard white level setting dropped below the specified range during scanning.
Causes: • White plate dirty • Spurious electrical noise on power supply line • Exposure lamp connection loose, broken, defective • Exposure lamp defective • Lamp stabilizer connection, loose, broken, defective • Lamp stabilizer defective • High voltage power supply harness loose, broken, defective • SBU defective • BCU defective • SIO defective

Code: 120

Description: Scanner home position error 1
The scanner HP sensor did not turn off during scanner initialization or copying.
Causes: • Scanner motor harness loose, broken, defective at scanner motor or at BCU • Scanner HP sensor harness, loose, broken, defective at HP sensor or at BCU • Scanner motor or motor driver board defective • Scanner motor drive board defective • Scanner HP sensor defective • BCU defective

Code: 121

Description: Scanner home position error 1
The scanner HP sensor did not turn on during scanner initialization or copying.
Causes: • Scanner motor harness loose, broken, defective at scanner motor or at BCU • Scanner HP sensor harness, loose, broken, defective at HP sensor or at BCU • Scanner motor or motor driver board defective • Scanner motor drive board defective • Scanner HP sensor defective • BCU defective

Code: 141

Description: Black level correction error
Black level correction could not be set properly during automatic adjustment.
Causes: • Harnesses at the SBU, IPU, BCU loose, broken, defective. • SBU defective • IPU defective • BCU defective

Code: 142

Description: White level correction error
White level correction could not be set properly during automatic adjustment.
Causes: • Harnesses at SBU, IPU, BCU loose, broken, defective • Spurious electrical noise on power supply line • White plate dirty or missing • Anti-condensation heater (option) in scanner unit not operating • Exposure lamp harness, loose, broken, defective • Exposure lamp defective • Lamp stabilizer harness loose, broken, defective • Lamp stabilizer defective • SBU defective • IPU defective • BCU defective • SIO Defective

Code: 143

Description: SBU auto adjust error
The machine could not acquire the white or black peak level setting at power on.
Causes: • Exposure lamp, lamp stabilizer harness connection loose, broken, defective • Exposure lamp defective • Lamp stabilizer defective • Spurious electrical noise on power supply line • White plate dirty or missing • Anti-condensation heater (option) in scanner unit not operating • Harness connection at SBU, iPU, BCU, SIO, loose, broken, defective • SBU defective • IPU defective • BCU defective • SIO Defective

Code: 144-1

Description: SBU connection error
Connection to the SBU could not be confirmed, possibly due to a defect in the BCU detection board
Causes: • Harness connection at IPU, BCU, SBU loose, broken, defective. • Spurious electrical noise on power supply line • IPU defective • BCU defective • SBU defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie